Jump to main content
Jump to site search

Issue 2, 2018
Previous Article Next Article

Super-durable, non-fluorinated superhydrophobic free-standing items

Author affiliations

Abstract

Although superhydrophobic coatings are commercially available, their weak mechanical durability hinders their large-scale applications such as for structural materials. Here a general press-in-mold method is reported to rapidly fabricate super-robust and non-fluorinated superhydrophobic free-standing items, through dispersing hydrophobic SiO2 nanoparticles in a series of polymers. The mechanical and chemical strength can be greatly improved by increasing the fabrication pressure, and the materials are found to retain superhydrophobicity after a knife/file scratch test, a liquid nitrogen test, severe sand/water impacts, acidic/alkali corrosion and 2000 cm sandpaper abrasion. These materials achieved better abrasion resistance than commercial superhydrophobic coatings and a higher retention ratio after abrasion tests and hardness than those of bricks. Radar diagrams were used to generalize the results of the mechanical and chemical tests to compare the material performances of SiO2/polymer blocks with those of bricks and commercial superhydrophobic coatings. The SiO2/polymer blocks achieved much better overall performance. This simple method has great potential for making either small domestic items or structural materials with robust superhydrophobicity.

Graphical abstract: Super-durable, non-fluorinated superhydrophobic free-standing items

Back to tab navigation

Supplementary files

Publication details

The article was received on 09 Oct 2017, accepted on 09 Nov 2017 and first published on 09 Nov 2017


Article type: Paper
DOI: 10.1039/C7TA08895G
Citation: J. Mater. Chem. A, 2018,6, 357-362
  • Open access: Creative Commons BY license
  •   Request permissions

    Super-durable, non-fluorinated superhydrophobic free-standing items

    X. Zhang, D. Zhi, L. Sun, Y. Zhao, M. K. Tiwari, C. J. Carmalt, I. P. Parkin and Y. Lu, J. Mater. Chem. A, 2018, 6, 357
    DOI: 10.1039/C7TA08895G

    This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. Material from this article can be used in other publications provided that the correct acknowledgement is given with the reproduced material.

    Reproduced material should be attributed as follows:

    • For reproduction of material from NJC:
      [Original citation] - Published by The Royal Society of Chemistry (RSC) on behalf of the Centre National de la Recherche Scientifique (CNRS) and the RSC.
    • For reproduction of material from PCCP:
      [Original citation] - Published by the PCCP Owner Societies.
    • For reproduction of material from PPS:
      [Original citation] - Published by The Royal Society of Chemistry (RSC) on behalf of the European Society for Photobiology, the European Photochemistry Association, and RSC.
    • For reproduction of material from all other RSC journals:
      [Original citation] - Published by The Royal Society of Chemistry.

    Information about reproducing material from RSC articles with different licences is available on our Permission Requests page.

Search articles by author

Spotlight

Advertisements