Jump to main content
Jump to site search


Suspension-based imprint lithography of ZnO–PMMA hybrids

Author affiliations

Abstract

Imprint lithography has been explored as a method to transfer arrays of patterned features onto pure polymers and polymer/metallic nanoparticle composites. Despite the success of this method for those materials, it has never been achieved on the sub-micron scale with polymer–oxide particle hybrids. This study patterns ZnO–PMMA (poly(methyl methacrylate)) hybrids via imprint lithography from co-suspensions of PMMA and ZnO nanoparticles in anisole from 1 vol% to 20 vol% ZnO solids loading. ZnO nanoparticles are functionalized with nonanoic acid to disperse the nanoparticles in anisole with dissolved PMMA. The feature fidelity of the patterned arrays decreases with increasing ZnO content, indicating an increase in particle agglomeration as the ZnO particle content increases. Feature size, ZnO content, and ZnO nanoparticle agglomeration are critical factors influencing the photoluminescence (PL) intensity. The ZnO solids loading at a 500 nm feature size needs to be 10 vol% or higher for the enhanced PL response. When the ridge size increases to 1 μm, ZnO solids loading as low as 1 vol% is feasible. This method of lithographic patterning of nanoparticle–polymer suspensions can be applied to a wide variety of hybrid devices and has the potential to open many applications including optical devices and biomedical screening.

Graphical abstract: Suspension-based imprint lithography of ZnO–PMMA hybrids

Back to tab navigation

Publication details

The article was received on 24 Apr 2017, accepted on 01 Jul 2017 and first published on 05 Jul 2017


Article type: Paper
DOI: 10.1039/C7SM00809K
Citation: Soft Matter, 2017, Advance Article
  •   Request permissions

    Suspension-based imprint lithography of ZnO–PMMA hybrids

    M. Gervasio and K. Lu, Soft Matter, 2017, Advance Article , DOI: 10.1039/C7SM00809K

Search articles by author

Spotlight

Advertisements