Jump to main content
Jump to site search
PLANNED MAINTENANCE Close the message box

Scheduled maintenance upgrade on Thursday 4th of May 2017 from 8.00am to 9.00am (BST).

During this time our websites will be offline temporarily. If you have any questions please use the feedback button on this page. We apologise for any inconvenience this might cause and thank you for your patience.



Facile hydrothermal fabrication of ZnO–graphene hybrid anode materials with excellent lithium storage properties

Author affiliations

Abstract

ZnO–graphene hybrid materials were successfully synthesized from graphene oxide (GO) and zinc acetate by a facile hydrothermal fabrication method. Three composites of ZnO–graphene hybrids with different graphene incorporation amounts were prepared by changing the dosage of GO. The chemical composition, morphology, and structural characterization reveal that the wurtzite-phase ZnO particles with diameters less than 10 nm were uniformly anchored on the graphene sheets to form ZnO–graphene hybrid materials. The ZnO–graphene hybrids were utilized as anodes in the construction of high-performance lithium-ion batteries. One of the hybrids, the ZnO–HG composite with 71.5 wt% graphene content, exhibits a high reversible specific capacity (749.2 mA h g−1), excellent cycle stability over 100 cycles (70.3% retention), and good rate performance at a high current density of 2 A g−1 (354.1 mA h g−1). Additionally, to further investigate the anodes for practical use in full Li-ion cells, we for the first time, tested the ZnO–graphene anodes at different cut-off voltages. The results show that even at the low cut-off voltage of 0.01–1.0 V, the ZnO–HG anode can still deliver the reversible capacity of 240 mA h g−1, which is qualified for use as an anode material in Li-ion full cells. The excellent performances are attributed to the presence of graphene which has an important role as the ZnO nucleation substrate during preparation, highly conductive agent, and volume expansion buffer during prolonged charge/discharge cycling.

Graphical abstract: Facile hydrothermal fabrication of ZnO–graphene hybrid anode materials with excellent lithium storage properties

Back to tab navigation
Please wait while Download options loads

Supplementary files

Publication details

The article was received on 22 Feb 2017, accepted on 30 Mar 2017 and first published on 31 Mar 2017


Article type: Paper
DOI: 10.1039/C7SE00102A
Citation: Sustainable Energy Fuels, 2017, Advance Article
  •   Request permissions

    Facile hydrothermal fabrication of ZnO–graphene hybrid anode materials with excellent lithium storage properties

    Y. Feng, Y. Zhang, X. Song, Y. Wei and V. S. Battaglia, Sustainable Energy Fuels, 2017, Advance Article , DOI: 10.1039/C7SE00102A

Search articles by author