Jump to main content
Jump to site search

Issue 2, 2017
Previous Article Next Article

A high-performance BaTiO3-grafted-GO-laden poly(ethylene oxide)-based membrane as an electrolyte for all-solid lithium-batteries

Author affiliations

Abstract

Nanocomposite polymer electrolytes (NCPEs) comprising poly(ethylene oxide) (PEO), barium titanate-grafted-graphene oxide (BaTiO3-g-GO) and lithium bis(trifluoromethanesulfonyl imide) (LiTFSI) were prepared by a simple hot-press technique. An increase of two orders of magnitude in the ionic conductivity was achieved upon incorporation of BaTiO3-g-GO in the polymeric matrix even at 0 °C. The addition of BaTiO3-g-GO as a filler has significantly enhanced the thermal stability and mechanical integrity of the membrane. The BaTiO3-g-GO-laden membrane was found to have better interfacial properties with a lithium metal anode than the filler-free membrane. Charge–discharge studies revealed a stable cycling profile even at 5C-rate and it was found to be superior to those reported earlier.

Graphical abstract: A high-performance BaTiO3-grafted-GO-laden poly(ethylene oxide)-based membrane as an electrolyte for all-solid lithium-batteries

Back to tab navigation

Publication details

The article was received on 21 Jun 2016, accepted on 17 Jul 2016 and first published on 29 Jul 2016


Article type: Research Article
DOI: 10.1039/C6QM00098C
Citation: Mater. Chem. Front., 2017,1, 269-277
  •   Request permissions

    A high-performance BaTiO3-grafted-GO-laden poly(ethylene oxide)-based membrane as an electrolyte for all-solid lithium-batteries

    N. Angulakshmi, G. P. Kar, S. Bose, E. B. Gowd, S. Thomas and A. M. Stephan, Mater. Chem. Front., 2017, 1, 269
    DOI: 10.1039/C6QM00098C

Search articles by author

Spotlight

Advertisements