Issue 34, 2017

High-performance photodetectors based on Sb2S3 nanowires: wavelength dependence and wide temperature range utilization

Abstract

Photodetectors which can work at both low and high temperatures are very important for the development of practical optoelectronic devices. Many studies have shown that low-dimensional semiconductors have more advantages in optoelectronic applications than their bulk forms. Here, we report the preparation of high-quality Sb2S3 nanowires (NWs) by a sulphur-assisted vapour transport method. The corresponding individual Sb2S3 NW based photodetectors exhibit good photoresponse in a wide spectral range from about 300 to 800 nm. The optimal photoresponse values are measured under the illumination of a 638 nm laser at room temperature: a high current ON/OFF ratio of about 210, a spectral responsivity of 1152 A W−1, a detectivity of 2 × 1013 Jones, and rise and fall times of about 37 ms, respectively. More importantly, the temperature dependence of the electrical conductivity of Sb2S3 shows three variation regions which can be attributed to the interaction between the carrier mobility and carrier concentration. The temperature dependence of the photoresponse of the photodetectors shows that they have good adaptability to temperature, and they worked very well at a wide temperature range from 8 to 420 K. Our results indicate that low-dimensional Sb2S3 crystals are promising candidates for new multifunctional optoelectronic devices.

Graphical abstract: High-performance photodetectors based on Sb2S3 nanowires: wavelength dependence and wide temperature range utilization

Supplementary files

Article information

Article type
Paper
Submitted
19 May 2017
Accepted
17 Jun 2017
First published
20 Jun 2017

Nanoscale, 2017,9, 12364-12371

High-performance photodetectors based on Sb2S3 nanowires: wavelength dependence and wide temperature range utilization

M. Zhong, X. Wang, S. Liu, B. Li, L. Huang, Y. Cui, J. Li and Z. Wei, Nanoscale, 2017, 9, 12364 DOI: 10.1039/C7NR03574H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements