Issue 1, 2017

Comparative cradle-to-gate energy assessment of indium phosphide and cadmium selenide quantum dot displays

Abstract

Quantum dots (QDs) are semiconductor nanocrystals (2–10 nm) with tunable band gaps and desirable luminescence properties. QDs have created great interest in consumer electronics, photovoltaics, and chemical and/or biological sensor applications. For example, QDs absorb short wavelength light and emit light with a desired wavelength, making them ideal for LCD displays. QDs are just beginning to be used in mass-produced displays, including products such as televisions, tablets, and smartphones. The most widely applied QD composition—a CdSe core metalloid complex (CdQD)—faces increasing environmental and regulatory scrutiny because cadmium and selenium nanomaterials pose uncertain human health and environmental risks. As a result, some manufacturers have introduced InP-based (InQD) displays, which have been shown to be less toxic than CdQDs. However, instead of basing environmental decisions on material hazard alone, it is important to take a more holistic approach to avoid unintended consequences. This paper presents a comparative cradle-to-gate life cycle environmental assessment of CdQD- and InQD-enabled displays. In this study, we compare the cumulative energy demand (CED), also referred to as the primary energy consumption, of colloidally synthesized CdSe and InP multishell QDs, and their subsequent incorporation in different display types. Additionally, we compare the CED for the two competing commercially available QD display technologies: on-surface and on-edge. Lastly, we estimate the energy repercussion of large-scale adoption of each of the production pathways for QD display manufacture. The results show that InP QD-enabled displays are far more energy intensive than the CdSe QD displays, and this difference becomes further amplified when large-scale adoption is considered. Our study highlights that life cycle thinking is essential for recognizing opportunities to advance QD production along environmentally sustainable pathways, which is critical information for researchers, QD display manufacturers, and regulatory agencies.

Graphical abstract: Comparative cradle-to-gate energy assessment of indium phosphide and cadmium selenide quantum dot displays

Supplementary files

Article information

Article type
Paper
Submitted
11 Aug 2016
Accepted
03 Nov 2016
First published
07 Nov 2016

Environ. Sci.: Nano, 2017,4, 244-254

Comparative cradle-to-gate energy assessment of indium phosphide and cadmium selenide quantum dot displays

S. S. Chopra and T. L. Theis, Environ. Sci.: Nano, 2017, 4, 244 DOI: 10.1039/C6EN00326E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements