Jump to main content
Jump to site search

Issue 45, 2017
Previous Article Next Article

Engineering n–p junction for photo-electrochemical hydrogen production

Author affiliations

Abstract

The generation of hydrogen from water and sunlight offers a promising approach for producing scalable and sustainable carbon free fuels. One of the challenges of solar-to-fuel technology is the design of efficient, long-lasting and low-cost photocathodes, which are responsible for absorbing sunlight and driving catalytic hydrogen evolution. We report on the protection of a Cu/Cu2O/CuO photoelectrode against photocorrosion by a 200–300 nm-thick BaTiO3 perovskite layer, deposited using the sol–gel method. This photoelectrode mediates H2 production with a current density of ∼3.1 mA cm−2 at 0 V versus RHE under 3 Sun irradiation and in a pH = 6 aqueous electrolyte. While the unprotected Cu/Cu2O/CuO photoelectrodes show a rapid decay of activity, the BaTiO3-protected photoelectrodes exhibit ∼10% current decay over 20 min.

Graphical abstract: Engineering n–p junction for photo-electrochemical hydrogen production

Back to tab navigation

Supplementary files

Publication details

The article was received on 28 Jul 2017, accepted on 18 Oct 2017 and first published on 18 Oct 2017


Article type: Paper
DOI: 10.1039/C7CP05122K
Citation: Phys. Chem. Chem. Phys., 2017,19, 30675-30682
  •   Request permissions

    Engineering n–p junction for photo-electrochemical hydrogen production

    J. Toupin, H. Strub, S. Kressmann, M. Boudot, V. Artero and Ch. Laberty-Robert, Phys. Chem. Chem. Phys., 2017, 19, 30675
    DOI: 10.1039/C7CP05122K

Search articles by author

Spotlight

Advertisements