Issue 36, 2017

Evolution of nanostructured single-phase CoSb3 thin films by low-energy ion beam induced mixing and their thermoelectric performance

Abstract

Skutterudites are emerging as potential candidates that show high efficiency and thus provide an ideal platform for research. The properties of nanostructured films of skutterudites are different from those of the corresponding bulk. The present study reports the evolution of nanostructured single-phase CoSb3 fabricated by using low-energy ion irradiation of Co/Sb bilayer films and subsequent annealing at an optimized temperature and their Seebeck coefficients (S). The effects of ion beam parameters with annealing on the phase evolution and nanostructure modifications were studied. An increase in Xe+ ion fluence resulted in complete mixing of Co/Sb on postannealing forming flower-like nanostructures of single phase CoSb3. The temperature-dependent electrical resistivity (ρ) increases with the ion fluence because of defect creation which further increases on postannealing due to surface nanostructuring. The S of these films of CoSb3 is found to be higher and this is attributed to the formation of a uniform layer of nanostructured CoSb3 alloy thin film. The S and Hall coefficients of all these films are negative implying that they are n-type semiconductors.

Graphical abstract: Evolution of nanostructured single-phase CoSb3 thin films by low-energy ion beam induced mixing and their thermoelectric performance

Article information

Article type
Paper
Submitted
25 May 2017
Accepted
03 Aug 2017
First published
21 Aug 2017

Phys. Chem. Chem. Phys., 2017,19, 24886-24895

Evolution of nanostructured single-phase CoSb3 thin films by low-energy ion beam induced mixing and their thermoelectric performance

M. Bala, S. Gupta, S. K. Srivastava, S. Amrithapandian, T. S. Tripathi, S. K. Tripathi, C. Dong, C. Chen, D. K. Avasthi and K. Asokan, Phys. Chem. Chem. Phys., 2017, 19, 24886 DOI: 10.1039/C7CP03527F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements