Jump to main content
Jump to site search

Issue 28, 2017
Previous Article Next Article

Two-step fabrication of NaxWO3 thin film via oxygen-vacancy-induced effect for energy efficient applications

Author affiliations

Abstract

Developing solar modulation materials such as alkali tungsten bronzes with high-performance and low-cost fabrication is extremely important for energy-saving project applications in our modern lives. In this paper, sodium tungsten bronze (NaxWO3) film was fabricated by a novel approach using a two-step method. Amorphous sub-stoichiometric WO3−x (0 < x < 1) film was deposited on glass using magnetron sputtering and then formed NaxWO3 after post-annealing treatment. Oxygen vacancies and tunnels existing in WO3−x receive ions such as Na+, O2−, etc. that diffuse from the glass substrate. The Na+ ion enters tunnels among WO6 octahedra. The O2− ion combines with an oxygen vacancy. The NaxWO3 film exhibits excellent infrared shielding performance with less than 10% infrared transmittance and high transmittance for visible light, as well as completely blocking UV light. Compared with traditional wet chemistry methods, this approach is much more concise with low cost, thus having huge potential applications for energy-saving projects.

Graphical abstract: Two-step fabrication of NaxWO3 thin film via oxygen-vacancy-induced effect for energy efficient applications

Back to tab navigation

Supplementary files

Publication details

The article was received on 11 May 2017, accepted on 19 Jun 2017 and first published on 19 Jun 2017


Article type: Paper
DOI: 10.1039/C7CE00896A
Citation: CrystEngComm, 2017,19, 3931-3938
  •   Request permissions

    Two-step fabrication of NaxWO3 thin film via oxygen-vacancy-induced effect for energy efficient applications

    Y. Xin, X. Cao, S. Bao, S. Ji, R. Li, Y. Yang, H. Zhou and P. Jin, CrystEngComm, 2017, 19, 3931
    DOI: 10.1039/C7CE00896A

Search articles by author

Spotlight

Advertisements