Jump to main content
Jump to site search


First 3D-printed complex inorganic polycrystalline scintillator

Author affiliations

Abstract

YAG:Ce scintillating material was obtained using 3D printing for the first time. A green body was printed using a stereophotolithography approach from co-precipitated powders and then sintered at 1600 °C in air to afford translucent ceramics. The scintillation light yield using 5.5 MeV α-particle excitation was more than 60% higher than that of the reference YAG:Ce single crystal.

Graphical abstract: First 3D-printed complex inorganic polycrystalline scintillator

Back to tab navigation

Supplementary files

Publication details

The article was received on 21 Mar 2017, accepted on 03 May 2017 and first published on 22 May 2017


Article type: Communication
DOI: 10.1039/C7CE00541E
Citation: CrystEngComm, 2017, Advance Article
  •   Request permissions

    First 3D-printed complex inorganic polycrystalline scintillator

    G. A. Dosovitskiy, P. V. Karpyuk, P. V. Evdokimov, D. E. Kuznetsova, V. A. Mechinsky, A. E. Borisevich, A. A. Fedorov, V. I. Putlayev, A. E. Dosovitskiy and M. V. Korjik, CrystEngComm, 2017, Advance Article , DOI: 10.1039/C7CE00541E

Search articles by author

Spotlight

Advertisements