Jump to main content
Jump to site search


Micro-sensors based on hypha-templated coaxial microfibers

Author affiliations

Abstract

Biological templates show great potential in the fabrication of advanced materials since they are green, renewable and easy to obtain. Hyphae of Penicillium are demonstrated to be a versatile template for the fabrication of coaxial microfibers. Five kinds of nanomaterials, including ZnO, Fe3O4, Cu(OH)2, polypyrrole (PPy) and polyaniline (PANI), are coated on the hyphal surface without any modification. SEM, EDS, XRD and FT-IR were employed to confirm the morphology and chemical components of the prepared microfibers. The results showed that the fabricated nanomaterials were attached firmly on the hyphal surface to form an outside shell. An adsorption experiment showed that the cations could be attached on the hyphal surface with the help of related functional groups, which explained well the formation mechanism of the coaxial structure. Microsensors based on PANI/hypha, PPy/hypha and ZnO/hypha microfibers were fabricated and tested with TMA as the model gas. The prepared sensors showed a good linear response toward TMA with an R2 higher than 0.977, relative standard deviation for reproducibility measurement lower than 7.2%, and fast response–recovery speed, which demonstrate the applicability of the prepared coaxial microfibers.

Graphical abstract: Micro-sensors based on hypha-templated coaxial microfibers

Back to tab navigation

Supplementary files

Publication details

The article was received on 28 Sep 2017, accepted on 24 Nov 2017 and first published on 24 Nov 2017


Article type: Paper
DOI: 10.1039/C7AY02318A
Citation: Anal. Methods, 2018, Advance Article
  •   Request permissions

    Micro-sensors based on hypha-templated coaxial microfibers

    L. Zhihua, S. Jiyong, H. Xiaowei, Z. Xiaobo, H. Xuetao, Z. Xucheng and H. E. Tahir, Anal. Methods, 2018, Advance Article , DOI: 10.1039/C7AY02318A

Search articles by author

Spotlight

Advertisements