Issue 46, 2016

Low-temperature atomic layer deposition of crystalline manganese oxide thin films

Abstract

We present a new low-temperature atomic layer deposition (ALD) process based on Mn2(CO)10 and ozone as precursors to fabricate crystalline α-Mn2O3 and Mn3O4 thin films; the phase composition is controlled by the deposition temperature such that the former phase forms in the range 60–100 °C and the latter in the range 120–160 °C. In both cases an appreciably high growth rate of ∼1.2 Å per cycle is achieved. The spinel-structured Mn3O4 thin films are shown to be ferrimagnetic with the transition temperature determined to be at ∼47 K.

Graphical abstract: Low-temperature atomic layer deposition of crystalline manganese oxide thin films

Article information

Article type
Paper
Submitted
01 Aug 2016
Accepted
19 Sep 2016
First published
19 Sep 2016

Dalton Trans., 2016,45, 18737-18741

Low-temperature atomic layer deposition of crystalline manganese oxide thin films

H. Jin, D. Hagen and M. Karppinen, Dalton Trans., 2016, 45, 18737 DOI: 10.1039/C6DT03040H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements