Issue 124, 2015

Switching mechanism of Al/La1−xSrxMnO3 resistance random access memory. I. Oxygen vacancy formation in perovskites

Abstract

Resistance random access memory is a promising next-generation non-volatile memory device due to its simple capacitor-like structure, ultrafast switching, and extended retention. A composite thin film of perovskite oxide such as La1−xSrxMnO3 (LSMO) and reactive metal such as aluminum (Al) is a key material for such device, but lack of clear understanding of its microscopic switching mechanism hampers further development along this direction. We therefore carry out a series of density functional theory calculations tracking down a molecular-level hypothesis of the switching process: (1) oxygen vacancy (VO) formation in LSMO and migration through LSMO towards the interface with Al and (2) AlOx oxide formation at the interface. As the first step of this series of effort, Al/LSMO/Al model junction devices are built to represent four different oxygen-deficiency levels of LSMO, and their structure, energy, electronic structure, and current–voltage characteristics are calculated and compared. We find that the VO formation in LSMO itself plays an interesting role in the resistive switching of the junction by initially reducing the number of majority-spin states around the Fermi level (becoming more insulating as expected) and then by increasing the number of minority-spin states through Mn–VO–Mn–VO filament-like pathways developed in the film (surprisingly becoming more conducting than stoichiometric LSMO). Assessment of the importance of this effect would require a comparison with the ON/OFF ratio induced by AlOx formation, which will be done separately in the second step of our effort, but the control of the oxygen deficiency appears to be a very important and challenging task required for reliable device fabrication and operation. The calculation also shows that, at sufficiently high doping level x, the VO formation energy is reasonably low and the VO migration energy barrier is even lower, explaining the fast switching of this type of devices. On the other hand, the calculated energy barrier is high enough to avoid thermal random-walk O migration which could refill VO sites, explaining the extended retention of such devices.

Graphical abstract: Switching mechanism of Al/La1−xSrxMnO3 resistance random access memory. I. Oxygen vacancy formation in perovskites

Article information

Article type
Paper
Submitted
21 Oct 2015
Accepted
23 Nov 2015
First published
25 Nov 2015

RSC Adv., 2015,5, 102772-102779

Author version available

Switching mechanism of Al/La1−xSrxMnO3 resistance random access memory. I. Oxygen vacancy formation in perovskites

N. Lee, Y. Lansac, H. Hwang and Y. H. Jang, RSC Adv., 2015, 5, 102772 DOI: 10.1039/C5RA21982E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements