Jump to main content
Jump to site search

Issue 38, 2015
Previous Article Next Article

Surfactant-mediated electrodeposition of a water-oxidizing manganese oxide

Author affiliations

Abstract

Splitting water into hydrogen and oxygen is one of the most promising ways of storing energy from intermittent, renewable sources in the future. Toward this goal, development of inexpensive, stable, and non-toxic catalysts for water oxidation is crucial. We report that the electrodeposition of manganese oxide in the presence of sodium dodecyl sulfate (SDS) produces a material that is highly active for electrocatalytic water oxidation at pH near 7 and remains stable for over 24 hours of sustained electrolysis. Clark electrode measurements demonstrate more than 95% Faradaic efficiency for oxygen evolution after an initial charging period. We found that catalytic performance was optimized in films prepared by electrodeposition using a precursor solution containing moderate concentration of substrates, namely 25 mM Mn2+ and 25 mM SDS. Microstructure and elemental analyses revealed that the deposited material, a mixed-phase manganese oxide, is structurally similar to materials used for electrochemical capacitors and batteries, drawing a parallel between highly studied cathode materials for rechargeable batteries and heterogeneous catalysts for water oxidation.

Graphical abstract: Surfactant-mediated electrodeposition of a water-oxidizing manganese oxide

Back to tab navigation

Supplementary files

Publication details

The article was received on 24 Jun 2015, accepted on 02 Sep 2015 and first published on 02 Sep 2015


Article type: Paper
DOI: 10.1039/C5DT02390D
Citation: Dalton Trans., 2015,44, 16873-16881
  •   Request permissions

    Surfactant-mediated electrodeposition of a water-oxidizing manganese oxide

    W. T. Osowiecki, S. W. Sheehan, K. J. Young, A. C. Durrell, B. Q. Mercado and G. W. Brudvig, Dalton Trans., 2015, 44, 16873
    DOI: 10.1039/C5DT02390D

Search articles by author

Spotlight

Advertisements