Issue 68, 2015

Efficient perovskite solar cells fabricated using an aqueous lead nitrate precursor

Abstract

A novel, aqueous precursor system (Pb(NO3)2 + water) is developed to replace conventional (PbI2 + DMF) for fabricating methylammonium lead iodide (MAPbI3) perovskite solar cells (PSCs). When the morphology and surface coverage of the Pb(NO3)2 film was controlled during coating, a power conversion efficiency of 12.58% under standard conditions (AM1.5, 100 mW cm−2) was achieved for the PSC.

Graphical abstract: Efficient perovskite solar cells fabricated using an aqueous lead nitrate precursor

Supplementary files

Article information

Article type
Communication
Submitted
27 Jun 2015
Accepted
10 Jul 2015
First published
10 Jul 2015

Chem. Commun., 2015,51, 13294-13297

Author version available

Efficient perovskite solar cells fabricated using an aqueous lead nitrate precursor

T. Hsieh, T. Wei, K. Wu, M. Ikegami and T. Miyasaka, Chem. Commun., 2015, 51, 13294 DOI: 10.1039/C5CC05298J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements