Issue 10, 2014

Room-temperature synthesis of Pd/C cathode catalysts with superior performance for direct methanol fuel cells

Abstract

Palladium nanoparticles supported on carbon black (Pd/C) have been successfully synthesized in a dispersion of sodium hydroxide, ethylene glycol, and carbon black (NaOH/EG/C) at room temperature without any protection with an inert gas atmosphere. Carbon black and EG dehydrated by NaOH (0.02 M) synergistically reduce Na2PdCl4 to metallic Pd at room temperature with a conversion efficiency of >99%. The capability of carbon black to provide the reducing function in the synthesis was verified by Fourier transform infrared (FTIR) spectroscopic data. When the NaOH concentration is <0.01 M, the reduction reaction is far from completion due to the very low degree of dehydration of EG. When the NaOH concentration is >0.05 M, the reduction reaction rate is slow owing to strong complexation between Pd2+ and OH and the oxidative etching of the formed Pd nanoparticles by air and OH. The synthesized Pd/C samples with Pd loadings of 20 and 40 wt% have Pd particle sizes of, respectively, 3.35 ± 0.73 nm and 3.86 ± 0.74 nm, uniformly loaded onto the carbon black support. Compared to commercial Pt/C (40 wt%) catalysts, the Pd/C (40 wt%) catalyst synthesized here shows superior methanol tolerance and performance as a cathode catalyst in a direct methanol fuel cell (DMFC).

Graphical abstract: Room-temperature synthesis of Pd/C cathode catalysts with superior performance for direct methanol fuel cells

Supplementary files

Article information

Article type
Paper
Submitted
18 Oct 2013
Accepted
10 Dec 2013
First published
10 Dec 2013

J. Mater. Chem. A, 2014,2, 3468-3476

Room-temperature synthesis of Pd/C cathode catalysts with superior performance for direct methanol fuel cells

W. Li, X. Zhao and A. Manthiram, J. Mater. Chem. A, 2014, 2, 3468 DOI: 10.1039/C3TA14193D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements