Issue 23, 2013

Simple and rapid removal of the interference in gangliosides extracted from HPTLC spot on MALDI-TOF MS analysis

Abstract

Extraction of thin-layer chromatography (TLC) spot with organic solvents is one of the convenient methods for glycolipid isolation from crude samples, but other background contaminants are also co-extracted during this process. Calcium sulfate (gypsum), starch and synthetic polymers are commonly used as binders in TLC plates, and the co-extracted synthetic polymers usually interfere with further structural analyses, especially in analysis by mass spectrometry (MS). Several column chromatographic processes are therefore used to purify these extracts. However, the purification processes are time consuming and suffer from sample loss. In our previous study, we established a method for detergent removal from glycolipids in a detergent-resistant membrane microdomain (DRM). The procedure is based on selective detergent extraction, in which the sample is dried in a glass tube, followed by washing with non-polar organic solvents, 1,2-dichloroethane (DCE). In this study, we have attempted to apply this method for the background removal from gangliosides and glycosylinositolphosphoceramides extracted from high performance TLC (HPTLC) spots. After DCE washing, these glycolipids were detected by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) MS, and it was found that DCE washing could effectively remove HPTLC backgrounds.

Graphical abstract: Simple and rapid removal of the interference in gangliosides extracted from HPTLC spot on MALDI-TOF MS analysis

Article information

Article type
Paper
Submitted
19 Jun 2013
Accepted
16 Sep 2013
First published
17 Sep 2013

Anal. Methods, 2013,5, 6617-6621

Simple and rapid removal of the interference in gangliosides extracted from HPTLC spot on MALDI-TOF MS analysis

H. Kamimiya, Y. Suzuki, A. Mathew, K. Kabayama, H. Kojima and Y. Kushi, Anal. Methods, 2013, 5, 6617 DOI: 10.1039/C3AY41011K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements