Jump to main content
Jump to site search

Issue 19, 2009
Previous Article Next Article

Solid-supported thin elastomer films deformed by microdrops

Author affiliations


A sessile droplet can deform the surface of a soft solid not only with its weight. The surface tension pulls up a ridge at the perimeter of the drop, and the capillary pressure embosses a quasi-spherical dimple underneath the drop. This holds for the case of a bulk solid. However, if the solid forms a film with thickness comparable to the deformation scale the shape and the depth of the dimple are strongly distorted. We investigated dimples on elastomer films with a Young's modulus of 25 kPa and thickness in the range 4–104 µm embossed by sessile ionic liquid droplets. The films are supported by an undeformable glass slide. Below a certain critical film thickness, the dimple is shallower and the ridge at the drop rim is less elevated than for the bulk elastomer. The deviations are more pronounced for thinner films. Further, troughs form at the two sides of the ridge. Their distance from the rim is equivalent to the layer thickness. The measurements are qualitatively reproduced by an analytical model and quantitatively by numerical simulations. A consistent physical picture of the deformation on the bulk elastomer and of the distortions on the thin films is given.

Graphical abstract: Solid-supported thin elastomer films deformed by microdrops

Back to tab navigation

Supplementary files

Publication details

The article was received on 08 Apr 2009, accepted on 24 Jun 2009 and first published on 30 Jul 2009

Article type: Paper
DOI: 10.1039/B907212H
Citation: Soft Matter, 2009,5, 3611-3617
  •   Request permissions

    Solid-supported thin elastomer films deformed by microdrops

    R. Pericet-Camara, G. K. Auernhammer, K. Koynov, S. Lorenzoni, R. Raiteri and E. Bonaccurso, Soft Matter, 2009, 5, 3611
    DOI: 10.1039/B907212H

Search articles by author