Determination of airborne formaldehyde by active sampling on 3-methyl-2-benzothiazolinone hydrazone hydrochloride-coated glass fibre filters

Abstract

Formaldehyde was sampled with the use of a standard miniature glass fibre filter coated with 3-methyl-2-benzothiazolinone hydrazone hydrochloride (MBTH). The formaldehyde hydrazone formed [i.e., the adduct of formaldehyde (HCHO) and MBTH] was desorbed from the filter with water and then oxidised by an iron(III) chloride–sulfamic acid solution to form a blue cationic dye in acidic medium which was subsequently determined by visible absorption at 628 nm. The recovery of HCHO as the cationic dye from MBTH-coated filters is 87–102% in the range 0.065–2.9 μg of HCHO. This corresponds to 4.3–193.3 μg m⁻³ in a 15 L air sample. The collection efficiency of the MBTH-coated filter is higher than 90%. When the filter sampling system is used in active mode, air can be sampled at a rate of up to 1 L min⁻¹, affording an overall sensitivity of about 3 μg m⁻³, corresponding to about 2 ppb v/v HCHO at 1 atm and 273 K. The method was successfully applied to the determination of HCHO in samples of indoor and outdoor air with satisfactory results.