Issue 19, 2021

Improving the performance of all-inorganic perovskite light-emitting diodes through using polymeric interlayers with a pendant design

Abstract

Despite demonstrating higher photoluminescence quantum yield and better ambient and operational stability than organic–inorganic hybrid perovskites, all-inorganic perovskites encounter the problem of inferior film quality and interfacial electrical properties, which limits the resultant device performance. In this study, three polymers, P4a–c, bearing distinct pendant groups based on a similar conjugated group are synthesized and employed as an interlayer to modify the PEDOT:PSS/CsPbBr3 interface. Due to the pendant design, P4a–c possess deep-lying HOMO levels and high transparency across the visible range. The different structures of the pendant groups in P4a–c are shown to result in their different propensity in energy-level modulation and solid-state aggregation, which plays a non-trivial role in affecting the resulting device performance. Due to the more appropriate energy levels and better regulation of CsPbBr3 crystals, P4c with a polar bridge moiety is shown to better mediate the performance of the derived device. The P4c-mediated PeLED delivers six times enhanced luminance (Lmax, ∼36 000 cd m−2) and 3.6 times enhanced external quantum efficiency (EQE, 2.16%) as compared to the control device (∼6000 cd m−2, 0.60%). Notably, all the devices using P4a–c interlayers deliver a lower turn-on voltage than the control device, clearly revealing the positive role of P4a–c interlayers on diminishing the barrier across the associated interface to improve charge injection efficiency.

Graphical abstract: Improving the performance of all-inorganic perovskite light-emitting diodes through using polymeric interlayers with a pendant design

Supplementary files

Article information

Article type
Research Article
Submitted
16 Jul 2021
Accepted
10 Aug 2021
First published
11 Aug 2021

Mater. Chem. Front., 2021,5, 7199-7207

Improving the performance of all-inorganic perovskite light-emitting diodes through using polymeric interlayers with a pendant design

C. Chen, Y. Lin, Y. Yang, Y. Chiang, Z. Li, H. Yip, W. Chen and C. Chueh, Mater. Chem. Front., 2021, 5, 7199 DOI: 10.1039/D1QM01027A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements