Correction: Highly sensitive, durable and stretchable plastic strain sensors using sandwich structures of PEDOT:PSS and an elastomer

Xi Fan; Naixiang Wang; Jinzhao Wang; Bingang Xu; Feng Yan

doi:10.1039/C8QM90010H

View PDF VersionPrevious ArticleNext Article

Open Access Article

This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence

DOI: 10.1039/C8QM90010H (Correction) Mater. Chem. Front., 2018, 2, 620-620

Correction: Highly sensitive, durable and stretchable plastic strain sensors using sandwich structures of PEDOT:PSS and an elastomer

Xi Fan ^a, Naixiang Wang ^a, Jinzhao Wang ^b, Bingang Xu ^c and Feng Yan *^a
^aDepartment of Applied Physics, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China. E-mail: apafyan@polyu.edu.hk
^bDepartment of Material Science and Engineering, Hubei University, Wuhan 430062, China
^cNanotechnology Center, Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China

Received 1st February 2018 , Accepted 1st February 2018

First published on 12th February 2018

Abstract

Correction for ‘Highly sensitive, durable and stretchable plastic strain sensors using sandwich structures of PEDOT:PSS and an elastomer’ by Xi Fan et al., Mater. Chem. Front., 2018, 2, 355–361.

The authors regret that the acknowledgements section had been inadvertently omitted from their article. The following statement should have been included:

Acknowledgements

This work was financially supported by the Research Grants Council (RGC) of Hong Kong, China (Project No. C5015-15G) and The Hong Kong Polytechnic University (Project No. 1-YW0Y, G-YBJ0 and 1-ZVK1).

The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.