Issue 28, 2017

In situ grown cobalt selenide/graphene nanocomposite counter electrodes for enhanced dye-sensitized solar cell performance

Abstract

Graphene nanocomposites were prepared by in situ hydrothermally growing CoSe nanoparticles on different amounts of graphene nanosheets (GNs). The influence of graphene content on the physical and electrochemical properties of CoSe was studied. The CoSe nanoparticles with high catalytic activity accelerated the reduction of triiodide, while the graphene facilitated charge transport during the catalytic process. The CoSe/GN0.50 displayed the highest catalytic activity due to its lowest charge transfer resistance. With increasing the graphene content beyond the optimum concentration, restacking of graphene caused a decreased electrocatalytic activity of CoSe/GN nanohybrids. The DSSCs fabricated with CoSe/GN0.50 as the CE exhibited 20% improvement in the photo-conversion efficiency (PCE) with respect to the standard Pt, much higher than using other reported binary metal selenides. This revealed that CoSe/GN0.50 nanohybrids could be used as a promising alternative to platinum counter electrodes for DSSCs.

Graphical abstract: In situ grown cobalt selenide/graphene nanocomposite counter electrodes for enhanced dye-sensitized solar cell performance

Supplementary files

Article information

Article type
Paper
Submitted
29 Jan 2017
Accepted
07 Jun 2017
First published
08 Jun 2017

J. Mater. Chem. A, 2017,5, 14583-14594

In situ grown cobalt selenide/graphene nanocomposite counter electrodes for enhanced dye-sensitized solar cell performance

V. Murugadoss, N. Wang, S. Tadakamalla, B. Wang, Z. Guo and S. Angaiah, J. Mater. Chem. A, 2017, 5, 14583 DOI: 10.1039/C7TA00941K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements