Issue 32, 2017

Interior multi-cavity/surface engineering of alginate hydrogels with polyethylenimine for highly efficient chromium removal in batch and continuous aqueous systems

Abstract

Chromium(VI) is a well-known highly toxic metal ion that has serious effects on the environment. Herein, novel functional alginate beads were developed cooperatively using polydopamine (PDA)–polyethylenimine (PEI)-modified CaCO3 composites (solid porogens with amine groups), with PEI acting as a granule interior and surface modification reagent. The hollow cavity structures with high-density reactive sites immobilized favorably into the interior of the alginate capsules and the PEI layers grafted onto the alginate bead surface via cross-linking led to bead-like composites with interior/surface accessible PEI, with the aim of exceptional Cr(VI) removal performance from aqueous conditions. SEM-EDS, TEM, XRD, BET, FT-IR, and XPS analysis were used to characterize these new sorbents. The adsorption properties were investigated using batch adsorption and continuous adsorption processes. The optimally designed adsorbent, namely 0.7-HS-PDA@PEI-SA@PEI, possessed excellent Cr(VI) adsorption capacity, exhibiting a superior experimental uptake capacity of 524.7 mg g−1 for Cr(VI), which was much higher than those of most reported adsorbents. The experimental data fitted well to the Freundlich isotherm and pseudo-second-order kinetic model in a batch experiment. The experimental breakthrough curves obtained under continuous processes were correlated with the Thomas and Adams–Bohart models. Significantly, the reusability experiments showed that 0.7-HS-PDA@PEI-SA@PEI beads exhibited excellent regeneration ability, with no obvious decline in adsorption capacity after five cycles. These results indicated that the newly designed 0.7-HS-PDA@PEI-SA@PEI beads were promising for Cr(VI) removal because of their ultra-high chromium adsorption capacity, rapid adsorption rate, low cost, and facile recovery process.

Graphical abstract: Interior multi-cavity/surface engineering of alginate hydrogels with polyethylenimine for highly efficient chromium removal in batch and continuous aqueous systems

Supplementary files

Article information

Article type
Paper
Submitted
30 Jun 2017
Accepted
20 Jul 2017
First published
20 Jul 2017

J. Mater. Chem. A, 2017,5, 17073-17087

Interior multi-cavity/surface engineering of alginate hydrogels with polyethylenimine for highly efficient chromium removal in batch and continuous aqueous systems

Y. Yan, Q. An, Z. Xiao, S. Zhai, B. Zhai and Z. Shi, J. Mater. Chem. A, 2017, 5, 17073 DOI: 10.1039/C7TA05679F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements