Issue 23, 2017

Self-planarized quantum-disks-in-nanowires ultraviolet-B emitters utilizing pendeo-epitaxy

Abstract

The growth of self-assembled, vertically oriented and uniform nanowires (NWs) has remained a challenge for efficient light-emitting devices. Here, we demonstrate dislocation-free AlGaN NWs with spontaneous coalescence, which are grown by plasma-assisted molecular beam epitaxy on an n-type doped silicon (100) substrate. A high density of NWs (filling factor >95%) was achieved under optimized growth conditions, enabling device fabrication without planarization using ultraviolet (UV)-absorbing polymer materials. UV-B (280–320 nm) light-emitting diodes (LEDs), which emit at ∼303 nm with a narrow full width at half maximum (FWHM) (∼20 nm) of the emission spectrum, are demonstrated using a large active region (“active region/NW length-ratio” ∼50%) embedded with 15 stacks of AlxGa1−xN/AlyGa1−yN quantum-disks (Qdisks). To improve the carrier injection, a graded layer is introduced at the AlGaN/GaN interfaces on both p- and n-type regions. This work demonstrates a viable approach to easily fabricate ultra-thin, efficient UV optoelectronic devices on low-cost and scalable silicon substrates.

Graphical abstract: Self-planarized quantum-disks-in-nanowires ultraviolet-B emitters utilizing pendeo-epitaxy

Article information

Article type
Paper
Submitted
01 Jan 2017
Accepted
24 Feb 2017
First published
03 Mar 2017

Nanoscale, 2017,9, 7805-7813

Self-planarized quantum-disks-in-nanowires ultraviolet-B emitters utilizing pendeo-epitaxy

B. Janjua, H. Sun, C. Zhao, D. H. Anjum, F. Wu, A. A. Alhamoud, X. Li, A. M. Albadri, A. Y. Alyamani, M. M. El-Desouki, T. K. Ng and B. S. Ooi, Nanoscale, 2017, 9, 7805 DOI: 10.1039/C7NR00006E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements