View PDF VersionPrevious ArticleNext Article

Open Access Article
This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence
DOI: 10.1039/C5TA90073E (Correction) J. Mater. Chem. A, 2015, 3, 9317-9317

Correction: Structure and function relationships in alkylammonium lead(II) iodide solar cells

Majid Safdari a, Andreas Fischer a, Bo Xu b, Lars Kloo a and James M. Gardner *a
aDivision of Applied Physical Chemistry, Department of Chemistry, KTH Royal Institute of Technology, SE-100 44, Stockholm, Sweden. E-mail: jgardner@kth.se
bOrganic Chemistry, Center of Molecular Devices, Department of Chemistry, KTH Chemical Science and Engineering, 10044, Stockholm, Sweden

Received 19th March 2015 , Accepted 19th March 2015

First published on 2nd April 2015

Abstract

Correction for ‘Structure and function relationships in alkylammonium lead(II) iodide solar cells’ by Majid Safdari et al., J. Mater. Chem. A, 2015, DOI: 10.1039/c4ta06174h.

A row from Table 3, and a phrase from the caption, were not included in the manuscript. The correct Table 3 is shown below.

Table 3 Photovoltaic parameters (average values of 5 devices) of the MAPbI3, EAPbI3 and PAPbI3 devices. 600 nm thick TiO2 films were used as substrate, and Spiro-OMeTAD was used as the HTM. A 200 nm layer of silver was used as back contact. Conductivity data collected as described in the text.

MAPbI3 EAPbI3 PAPbI3
J sc mA cm−2 16.29 ± 1.69 0.77 ± 0.14 0.075 ± 0.021
V oc (V) 0.784 ± 0.026 0.662 ± 0.040 0.564 ± 0.034
FF 0.580 ± 0.011 0.521 ± 0.051 0.372 ± 0.034
η (%) 7.4 ± 0.59 0.26 ± 0.025 0.016 ± 0.004
APCE 78.35 2.83 0.18
Band gap (eV) 1.6 2.2 2.4
Conductivity (S cm−1) 1.1 × 10−4 1.3 × 10−6 9.4 × 10−7

The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.

This journal is © The Royal Society of Chemistry 2015