Issue 5, 2016

Low-temperature selective catalytic reduction of NOx with NH3 over a manganese and cerium oxide/graphene composite prepared by a hydrothermal method

Abstract

MnOx–CeO2/graphene (MnOx–CeO2/GR) catalysts prepared by a hydrothermal method with different mass ratios of graphene (0–0.45 wt%) were investigated for the low-temperature selective catalytic reduction (SCR) of NOx with NH3. The as-prepared catalysts have been characterized systematically to elucidate their morphological structure and surface properties by XRD, SEM, TEM, BET, XPS, H2-TPR, NH3-TPD and FT-TR. It was found that the environmentally benign MnOx–CeO2/GR (0.3 wt%) catalyst exhibited excellent NH3-SCR activity and strong resistance against H2O and SO2, which is very competitive for application in controlling NOx emission from flue gas. On the basis of the catalyst characterization, the high specific surface areas, the uniform distribution of active sites, and the interaction of manganese and cerium oxide species played key roles in the excellent catalytic performance of MnOx–CeO2/GR and resulted in improved SO2 tolerance.

Graphical abstract: Low-temperature selective catalytic reduction of NOx with NH3 over a manganese and cerium oxide/graphene composite prepared by a hydrothermal method

Article information

Article type
Paper
Submitted
31 Jul 2015
Accepted
30 Sep 2015
First published
05 Oct 2015

Catal. Sci. Technol., 2016,6, 1507-1514

Author version available

Low-temperature selective catalytic reduction of NOx with NH3 over a manganese and cerium oxide/graphene composite prepared by a hydrothermal method

X. Xiao, Z. Sheng, L. Yang and F. Dong, Catal. Sci. Technol., 2016, 6, 1507 DOI: 10.1039/C5CY01228G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements