View PDF VersionPrevious ArticleNext Article

Open Access Article
This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence
DOI: 10.1039/C4QI00094C (Research Article) Inorg. Chem. Front., 2014, 1, 621-640

Explosive Werner-type cobalt(III) complexes†‡

Raik Deblitz a, Cristian G. Hrib a, Steffen Blaurock a, Peter G. Jones b, Georg Plenikowski c and Frank T. Edelmann *a
aChemisches Institut der Otto-von-Guericke-Universität Magdeburg, Universitätsplatz 2, 39106 Magdeburg, Germany. E-mail: frank.edelmann@ovgu.de; Fax: (+49)391-6712933
bInstitut für Anorganische und Analytische Chemie der TU Braunschweig, Hagenring 30, 38106 Braunschweig, Germany
cNammo Germany GmbH, Wilhelm-Dümling-Str. 12, 39218 Schönebeck, Germany

Received 11th July 2014 , Accepted 30th July 2014

First published on 6th August 2014

Abstract

A series of potentially explosive Werner-type cobalt(III) complexes comprising the anions azotetrazolate, nitrotetrazolate, picrate and dipicrylamide were prepared via simple metathetical routes. Treatment of [Co(NH3)5NO2]Cl2, trans-[Co(NH3)4(py)NO2]Cl2 (py = pyridine), trans-[Co(NH3)4(NO2)2]Cl, and [Co(NH3)5N3]Cl2 with equimolar amounts of disodium azotetrazolate, (Na2C2N10·5H2O, 1), in aqueous solutions afforded new cobalt(III) azotetrazolate salts [Co(NH3)5NO2](C2N10)·2H2O (2), trans-[Co(NH3)4(py)NO2](C2N10)·2H2O (3), trans-[Co(NH3)4(NO2)2]2(C2N10) (4), and [Co(NH3)5N3](C2N10)·H2O (5) in moderate to excellent yields (46–88%). Similar treatment of trans-[Co(NH3)4(NO2)2]Cl with 1 equiv. of sodium 5-nitrotetrazolate dihydrate (= NaNT, 6) afforded the novel cobalt(III) 5-nitrotetrazolate derivative trans-[Co(NH3)4(NO2)2](NT)·H2O (7) as orange, rectangular prismatic crystals in 64% yield. Two complex cobalt(III) picrates, trans-[Co(NH3)4(NO2)2](picrate)·H2O (9) and [Co(NH3)5N3](picrate)2 (10), were prepared in a similar manner from the corresponding chloride precursors and equimolar amounts of sodium picrate. The reaction of trans-[Co(NH3)4(NO2)2]Cl with sodium dipicrylamide (= NaDPA) in a 1[thin space (1/6-em)]:[thin space (1/6-em)]1 molar ratio gave the first cobalt(III) dipicrylamide, trans-[Co(NH3)4(NO2)2](DPA)·H2O (12). Finally, the highly explosive, dark blue-green dichroitic non-electrolyte complex mer-[Co(en)(py)(N3)3] (13) was formed upon treatment of [Co(en)(py)2(NH3)Cl]Cl2·H2O with excess NaN3 in hot water (93% yield). The molecular and crystal structures of 2, 3, 4, 5, 7, 9, 10, 12, and 13 were determined by single-crystal X-ray diffraction. In the solid state, all compounds comprised extensive hydrogen-bonded supramolecular networks. Representative studies of the energetic properties (impact and friction sensitivity, combustion) revealed that some of the new compounds can be classified as primary explosives.

Introduction

Primary explosives are highly sensitive explosive compounds which are used to initiate large amounts of secondary explosives such as 2,4,6-trinitrotoluene (= TNT)1 in initiating devices like primers and detonators for commercial and military applications. Historically, one of the first practical primary explosives was mercury fulminate, Hg(CNO)2 (“Knallquecksilber”), which has been widely used for almost 100 years.2 Later, mercury fulminate was replaced by lead(II) azide, Pb(N3)2,3 and several forms of lead styphnate (= LS, Scheme 1)4 which have been generally used as primary explosives until today.
image file: c4qi00094c-s1.tif
Scheme 1

However, lead(II) azide shows severe disadvantages such as highly toxic hydroazoic acid, HN3, can be formed under certain conditions,3 and the use of all these materials is always associated with lead pollution in the environment.5 For this reason, the search for environmentally acceptable (“green”) primary explosives is currently a hot topic in this field.6 One of the most useful approaches is the development of nitrogen-rich energetic compounds based on tetrazole and tetrazine derivatives.7 A highly promising candidate that has come out of these research efforts is the recently reported copper(I) 5-nitrotetrazolate (= DBX-1).8 Easily prepared DBX-1 has been shown to be one of the best “drop-in” lead(II) azide replacements to date due to its high thermal stability and comparable safety and performance.

Several Werner-type cobalt(III) complexes comprising 5-nitrotetrazolate and related ligands have also been synthesized and reported to have primary explosive properties. In particular the complexes shown in Scheme 2, pentaammine(5-cyanotetrazolato-N2)cobalt(III) perchlorate (CP),9 pentaammine(4,5-diaminotetrazole-N2)cobalt perchlorate,10 and tetraammine-bis(5-nitrotetrazolato-N2)cobalt(III) perchlorate (BNCP),11 were shown to have suitable energetic properties. However, their perchlorate content makes them unacceptable as alternative primary explosives because perchlorate has various adverse health effects.12


image file: c4qi00094c-s2.tif
Scheme 2

Other potentially explosive Werner-type cobalt(III) complexes have frequently been described in the literature without any practical use. These comprise mainly some long-known azido complexes. While several series of complexes such as [Co(NH3)5N3]2+,13cis- and trans-[Co(NH3)4(N3)2]+,14 and cis- and trans-[Co(en)2(N3)2]+ (en = ethylene-1,2-diamine)15 are often thermally quite stable (with the exception of some azides and perchlorates), there are several cases of highly explosive species. For example, several salts of the [Co(N3)6]3− anion were found to be quite sensitive to impact and friction,16 and the compound trans-tetraammine-diazido-cobalt(III)-trans-diammine-tetraazido-cobaltate(III), [Co(NH3)4(N3)2][Co(NH3)2(N3)4], is described as a “dangerous detonator”, but its energetic properties have not been studied in detail.17 Also notable is the (in)famous green non-electrolyte complex mer-[Co(NH3)3(N3)3]. It has been reported that this compound is highly impact-sensitive and can even explode upon grinding under water.18

In this contribution we report the synthesis, structural characterization, and energetic properties of a series of new explosive Werner-type cobalt(III) complexes. Our synthetic protocol involves combination of complex cobalt(III) cations with various nitrogen-rich or oxygen-rich, sensitive, secondary high explosive anions. For the present study, azotetrazolate, 5-nitrotetrazolate, picrate, and dipicrylamide were chosen as suitable representative energetic anions. Unlike the cobalt(III) complexes depicted in Scheme 2, the new compounds reported here contain the energetic anions in the outer sphere and not directly coordinated to the central Co3+ cation.

Results and discussion

Azotetrazolates

The azotetrazolate dianion, (C2N102−), has been found to be extremely useful in the design of new nitrogen-rich energetic salts.19 The disodium salt Na2C2N10·5H2O (1) is the most readily accessible azotetrazolate precursor described in the literature. It was first prepared by Thiele more than 100 years ago by oxidation of aminotetrazole with KMnO4 in boiling sodium hydroxide solution (Scheme 3). This rather harsh method provides disodium azotetrazolate as its pentahydrate in the form of large, bright yellow crystals.20
image file: c4qi00094c-s3.tif
Scheme 3

New Werner-type cobalt(III) complexes containing the azotetrazolate anion were synthesized according to Scheme 4 by metathetical reactions of chloride precursors with equimolar amounts of 1. As starting materials, several easily accessible penta- and tetraamminecobalt(III) chlorides containing nitro and azido ligands were chosen ([Co(NH3)5NO2]Cl2, trans-[Co(NH3)4(py)NO2]Cl2 (py = pyridine), trans-[Co(NH3)4(NO2)2]Cl, and [Co(NH3)5N3]Cl2).


image file: c4qi00094c-s4.tif
Scheme 4

All reactions illustrated in Scheme 4 were carried out at room temperature in concentrated aqueous solutions. The products [Co(NH3)5NO2](C2N10)·2H2O (2, 63% yield), trans-[Co(NH3)4(py)NO2](C2N10)·2H2O (3, 46%), trans-[Co(NH3)4(NO2)2]2(C2N10) (4, 87%), and [Co(NH3)5N3](C2N10)·H2O (5, 88%) crystallized within 24 h upon undisturbed standing of the reaction mixtures. The nitro complexes 2–4 formed yellow to orange crystals, whereas the azido complex 5 crystallized in the form of dark red rods. Recrystallization from hot water was possible but not necessary, as the products directly obtained from the original reaction mixtures were already quite pure. Routine characterization was mainly based on IR data and elemental analyses. As expected, these data provided only some basic information on the nature of the products. Thus they will be briefly discussed here only for compound [Co(NH3)5NO2](C2N10)·2H2O (2) as a typical example. Elemental analysis was consistent with the formation of the expected product as the dihydrate. The IR spectrum showed two intense absorptions which are characteristic for the free azotetrazolate dianion. A strong band around 730–740 cm−1 can be assigned to the asymmetrical C–N[double bond, length as m-dash]N stretching mode of the azo group, whereas a strong band around 1390–1400 cm−1 is attributable to the asymmetrical N–C[double bond, length as m-dash]N stretching mode of the ring. These characteristic bands are more or less the same in all compounds containing uncoordinated azotetrazolate dianions.19 In the IR spectrum of 2, the two bands appear at 740 and 1402 cm−1. While 1H NMR data were unavailable for the new complexes 2–5, the presence of uncoordinated azotetrazolate dianions could also be verified by the 13C NMR data, measured in DMSO-d6 solutions. In all four cases, the signal of the carbon atom of the azotetrazolate dianion appeared in the 13C NMR spectra at δ = 173.1, which is characteristic of salt-like azotetrazolates.19 In the 13C NMR spectrum of 3 the signals of the coordinated pyridine could be observed at δ = 8.4, 7.8, and 7.3.

All four new compounds were also structurally characterized by single-crystal X-ray diffraction. In all cases, suitable single-crystals were obtained directly from the original reaction mixtures. A summary of the crystallographic data and refinement parameters for all nine crystal structures reported in this study is given in Table 1. Fig. 1–12 show photographs of the single-crystals, ORTEP drawings of the molecular structures including selected bond lengths and angles, as well as packing diagrams of the hydrogen-bonded networks in the solid state.


image file: c4qi00094c-f1.tif
Fig. 1 Single-crystals of [Co(NH3)5NO2](C2N10)·2H2O (2).

image file: c4qi00094c-f2.tif
Fig. 2 ORTEP drawing of [Co(NH3)5NO2](C2N10)·2H2O (2) at the 50% probability level. Selected bond lengths (Å) and angles (°): Co–N(13) 1.941(3), Co–N(16) 1.946(4), Co–N(14) 1.949(3), Co–N(11) 1.956(3), Co–N(12) 1.965(3), Co–N(15) 1.969(3), N(1)–N(2) 1.252(4), N(1)–C(1) 1.410(5),N(2)–C(2) 1.407(5), N(2)–N(1)–C(1) 112.6(3), N(1)–N(2)–C(2) 111.7(3).

image file: c4qi00094c-f3.tif
Fig. 3 Packing diagram of [Co(NH3)5NO2](C2N10)·2H2O (2). View along the b-axis.

image file: c4qi00094c-f4.tif
Fig. 4 Single-crystals of [Co(NH3)4(py)NO2](C2N10)·2H2O (3).

image file: c4qi00094c-f5.tif
Fig. 5 ORTEP drawing of [Co(NH3)4(py)NO2](C2N10)·2H2O (3) at the 50% probability level. Selected bond lengths (Å) and angles (°): Co–N(11) 1.996(3), Co–N(12) 1.899(3), Co–N(13) 1.961(3), Co–N(14) 1.961(3), Co–N(15) 1.961(3), Co–N(16) 1.956(3), N(9)–N(10) 1.261(5), N(9)–C(1) 1.408(5), N(10)–C(2) 1.399(5), N(12)–Co–N(11) 178.98(15), N(10)–N(9)–C(1) 112.8(3), N(9)–N(10)–C(2) 113.4(3).

image file: c4qi00094c-f6.tif
Fig. 6 Packing diagram of [Co(NH3)4(py)NO2](C2N10)·2H2O (3). View along the b-axis.

image file: c4qi00094c-f7.tif
Fig. 7 Single-crystals of trans-[Co(NH3)4(NO2)2]2(C2N10) (4).

image file: c4qi00094c-f8.tif
Fig. 8 ORTEP drawing of trans-[Co(NH3)4(NO2)2]2(C2N10) (4) at the 50% probability level. Selected bond lengths [Å] and angles [°]:Co–N(7) 1.9319(15)Co–N(6) 1.9360(15), Co–N(9) 1.9453(16), Co–N(8) 1.9514(17), Co–N(11) 1.9532(16), Co–N(10) 1.9555(18), C(1)–N(1) 1.405(2), N(1)–N(1)#1 1.251(3), N(1)#1–N(1)–C(1) 113.37(18). (#1 −x + 1, −y + 1, −z + 2).

image file: c4qi00094c-f9.tif
Fig. 9 Packing diagram of trans-[Co(NH3)4(NO2)2]2(C2N10) (4). View along the a-axis.

image file: c4qi00094c-f10.tif
Fig. 10 Single-crystals of [Co(NH3)5N3](C2N10)·H2O (5).

image file: c4qi00094c-f11.tif
Fig. 11 ORTEP drawing of [Co(NH3)5N3](C2N10)·H2O (5) at the 50% probability level. Selected bond lengths [Å] and angles [°]: Co(1)–N(14) 1.9496(13), Co(1)–N(1) 1.9550(14), Co(1)–N(17) 1.9566(13), Co(1)–N(18) 1.9637(14), Co(1)–N(16) 1.9758(14), Co(1)–N(15) 1.9804(14), N(4)–N(9) 1.2553(18), N(4)–N(9)–C(2) 113.09(12), N(9)–N(4)–C(1) 112.34(13).

image file: c4qi00094c-f12.tif
Fig. 12 Packing-diagram of [Co(NH3)5N3](C2N10)·H2O (5). View along the b-axis.
Table 1 Crystallographic data for 2, 3, 4, 5, 7, 9, 10, 12, and 13
  2 3 4 5 7 9 10 12 13
Empirical formula C2H19CoN16O4 C7H21CoN16O4 C2H24Co2N22O8 C2H17CoN18O CH14CoN11O7 C6H16CoN9O12 C12H19CoN14O14 C24H38Co2N26O35 C7H13CoN12
a (Å) 12.510(3) 7.3460(15) 7.1228(14) 12.067(2) 7.8926(11) 6.8481(3) 7.0622(14) 12.6374(3) 6.2607(12)
b (Å) 7.4092(15) 9.907(2) 7.3402(15) 7.4493(15) 7.8926(11) 13.4859(5) 12.888(3) 13.7368(3) 6.8540(12)
c (Å) 17.702(4) 13.308(3) 10.138(2) 15.764(3) 19.125(4) 18.5624(6) 13.299(3) 15.6996(4) 15.006(2)
α (°) 90 71.60(3) 96.49(3) 90 90 75.421(3)° 98.33(3) 113.942(2) 84.600(14)
β (°) 100.07(3) 83.33(3) 105.79(3) 90.94(3) 90 89.746(3)° 104.80(3) 90.678(2) 79.945(15)
γ (°) 90 78.54(3) 95.10(3) 90 90 85.199(3)° 90.52(3) 89.527(2) 85.933(15)
V (Å3) 1615.5(6) 899.2(3) 502.79(17) 1416.8(5) 1191.3(3) 1653.03(11) 1156.6(4) 2490.71(10) 630.22(19)
Z 4 2 1 4 4 4 2 2 2
Formula weight 390.21 452.28 602.22 368.21 351.12 465.18 642.30 1368.59 324.19
Space group P21/c P[1 with combining macron] P[1 with combining macron] P21/n I41md P[1 with combining macron] P[1 with combining macron] P[1 with combining macron] P[1 with combining macron]
T (°C) −140 −140 −140 −140 −140 −173 −140 −173 −173
λ (Å) 0.71073 0.71073 0.71073 0.71073 0.71073 1.54184 0.71073 1.54184 1.54184
D calcd (g cm−3) 1.605 1.671 1.989 1.726 1.958 1.869 1.844 1.825 1.709
μ (mm−1) 1.111 1.011 1.740 1.250 1.502 8.991 0.845 6.434 10.826
F(000) 808 468 308 760 720 952 656 1396 332
Data/restraints/parameters 3973/35/243 4440/4/305 2457/0/202 2764/0/267 855/2/67 6845/0/521 6204/33/374 10[thin space (1/6-em)]298/0/825 2563/6/197
Goodness-of-fit on F2 1.096 1.193 1.099 0.974 1.208 1.051 1.040 1.039 0.955
R(Fo or Fo2) 0.0577 0.0611 0.0325 0.0226 0.0232 0.0566 0.0512 0.0374 0.0386
R w(Fo or Fo2) 0.1341 0.1282 0.0876 0.0573 0.0566 0.1553 0.0998 0.0956 0.0879

In the solid state, compounds 2–5 consist of the complex cobalt(III) cations and azotetrazolate dianions in the respective stoichiometric ratio plus one (5) or two (2, 3) equivalents of water of crystallization. Only the dinitro complex trans-[Co(NH3)4(NO2)2]2(C2N10) (4) crystallizes water-free. The individual ions display no unusual structural features. The hexa-coordinated cobalt(III) cations show no significant deviation from the regular octahedral coordination geometry. Taken as a typical example, the cis-N–Co–N angles in the trans-[Co(NH3)4(NO2)2]+ cation in 4 are in the very narrow range of 87.86(8)–91.10(7)°, whereas the trans-N–Co–N angles range from 177.01(6)° to 179.77(6)°. The central N[double bond, length as m-dash]N double-bond length in the azotetrazolate dianion in 4 is 1.251(3) Å, whereas the N–N distances in the tetrazole rings clearly indicate delocalization of the negative charge because of bond homogenization with N–N distances of 1.339(2) Å (N2–N3), 1.326(2) Å (N3–N4), and 1.342(2) Å (N4–N5) (reference bond lengths: C–N, 1.47 Å; N[double bond, length as m-dash]N, 1.24 Å; and N–N, 1.47 Å).19 These values are in excellent agreement with those reported in the literature and are also quite uniform within the series of azotetrazolates 2–5. Thus the structural parameters of the remaining three complexes will not be discussed here in more detail. What makes the crystal structures of 2–5 special is the presence of extended hydrogen-bonded networks in the solid state as is illustrated in Fig. 3, 6, 9, and 12. Hydrogen-bonded networks are quite typical for nearly all previously reported salt-like azotetrazolates.19Fig. 12 displays the packing diagram of [Co(NH3)5N3](C2N10)·H2O (5) as a typical example. It can be seen that the azotetrazolate anions form stacks interconnecting the [Co(NH3)5N3]2+ cations. Six of the nitrogen atoms of the tetrazolyl rings are engaged in hydrogen bonding (see Table S12 in the ESI‡). Four of them (N7, N11, N12, N13, cf.Fig. 11) form N⋯H–N hydrogen bonds in the range of 3.013(2)–3.098(2) Å with NH3 ligands in the [Co(NH3)5N3]2+ cation, while the other two (N5, N8) form N⋯H–O hydrogen bonds (2.832(2) and 3.044(2) Å) with the water of crystallization. This water molecule obviously plays a central role in this crystal packing as it is also connected to two NH3 ligands in the [Co(NH3)5N3]2+ cation (O1⋯H–N18 and O1⋯H–14). Full details on the hydrogen bonding in all crystal structures reported here can be found in the ESI.‡

Nitrotetrazolates

Explosive materials comprising the 5-nitrotetrazolate anion, [CN4NO2]− (= NT), play an important role in the chemistry and technology of nitrogen-rich energetic materials. Various salts21 and transition metal complexes22 containing nitrotetrazolate have already been prepared and tested. Recently, we described the synthesis, structural characterization, and energetic properties of [Me3Sn(μ-OH)SnMe3(μ-OH)SnMe3(H2O)][NT] as the first example of a metal–organic main-group metal nitrotetrazolate.23 As mentioned above, perhaps the most promising candidate in this area is the recently reported copper(I) 5-nitrotetrazolate (= DBX-1).8 Manufacture of DBX-1 involves treatment of copper(II) chloride with sodium 5-nitrotetrazolate dihydrate (= NaNT, 6) in the presence of sodium ascorbate as a reducing agent. The synthesis of the important precursor NaNT (6) has been investigated in great detail.21e,24 For use in this study, NaNT (6) was prepared by a modified literature method according to Scheme 5.21e,25 The synthesis involves a modified Sandmeyer reaction (diazotization) of 5-aminotetrazole in the presence of copper(II) sulfate. In the first step, a pale blue, very explosive (especially when dry) intermediate of the composition Cu(NT)2·HNT is formed, which is kept in a wet state and subsequently treated with warm sodium hydroxide solution to afford 6 as the dihydrate. While the dihydrate of NaNT is fairly insensitive and can be handled with appropriate care, the anhydrous material is dangerously explosive.21e,25 Most recently, a significantly improved preparation of high-purity NaNT has been published, which avoids the handling of the potentially dangerous Cu(NT)2·HNT intermediate.24c
image file: c4qi00094c-s5.tif
Scheme 5

In the course of the present study, the first cationic Werner-type cobalt(III) ammine complex containing 5-nitrotetrazolate as the counterion, i.e. not directly coordinated to the central Co3+ ion (cf.Scheme 2), was prepared according to Scheme 6. Combination of aqueous solutions of equimolar amounts of trans-[Co(NH3)4(NO2)2]Cl and sodium 5-nitrotetrazolate dihydrate (= NaNT, 6) afforded the novel cobalt(III) 5-nitrotetrazolate derivative trans-[Co(NH3)4(NO2)2](NT)·H2O (7) as orange, rectangular prismatic crystals in 64% yield according to Scheme 6.


image file: c4qi00094c-s6.tif
Scheme 6

The IR spectrum of 7 is dominated by strong or medium bands attributable to the asymmetric (1550 cm−1 (s)) and symmetric (1322 cm−1 (s)) stretching vibrations and the deformation vibration (820 cm−1 (m)) of the nitro group.24a A 13C NMR spectrum, measured with a saturated solution in D2O, showed the resonance of the single tetrazole ring carbon atom at δ 165.2 ppm, which differs only slightly from the values around δ 169 ppm reported for alkali metal 5-nitrotetrazolates.24a The formation of trans-[Co(NH3)4(NO2)2](NT)·H2O was also verified by a single-crystal X-ray diffraction study (Table 1, Fig. 13–15). Compound 7 crystallizes in the tetragonal space group I4[1 with combining macron] as the monohydrate.


image file: c4qi00094c-f13.tif
Fig. 13 Single-crystals of trans-[Co(NH3)4(NO2)2](NT)·H2O (7).

image file: c4qi00094c-f14.tif
Fig. 14 ORTEP drawing of 7trans-[Co(NH3)4(NO2)2](NT)·H2O (7) at the 50% probability level. Selected bond lengths [Å] and angles [°]: Co–N(1) 1.937(3), Co–N(2) 1.942(4), Co–N(3) 1.9537(10), Co–N(3)#2 1.9537(10), Co–N(3)#3 1.9537(10), Co–N(3)#4 1.9537(10), C(1)–N(4) 1.438(6), O(4)–N(4)–C(1) 117.44(16). (#1 −x + 1, −y + 0, z + 0; #2 −x + 0, y + 0, z + 0; #3 x, −y + 1, z; #4 −x + 0, −y + 1, z + 0).

image file: c4qi00094c-f15.tif
Fig. 15 Packing diagram of trans-[Co(NH3)4(NO2)2](NT)·H2O (7). View along the b-axis.

Similar to the azotetrazolates 2–5, the individual ions in 7 show no unexpected structural features. With 1.331(3)–1.333(3) Å all five bonds within the tetrazole ring are identical and comparable to those in other salts comprising the 5-nitrotetrazolate anion.24 The nitro group is highly symmetrical with a N–O distance of 1.228(2) Å. As shown in Fig. 15, the crystal structure of 7 also comprises an extensive network of hydrogen bonds. The crystal structure consists of mutually linked trans-[Co(NH3)4(NO2)2]+ cations and 5-nitrotetrazolate anions. Details on the hydrogen-bridging can be found in Table S15 in the ESI.‡ Notably, there are four intramolecular O⋯H–N hydrogen bonds in the range of 2.901(2)–3.380(2) Å within the trans-[Co(NH3)4(NO2)2]+ cation between coordinated NH3 molecules and oxygen atoms of the nitro groups. The water of crystallization connects cations and anions via one N⋯H–O hydrogen bond to N5 in the tetrazole ring (N5⋯H–O3 2.960(2) Å) and one O⋯H–N hydrogen bond to one of the coordinated NH3 molecules (O3⋯H–N3 3.082(2) Å). Finally, there is one direct N⋯H–N hydrogen bond between N6 in the tetrazole ring and one of the NH3 ligands (N6⋯H–N3B 3.156(2) Å).

Picrates

It is well established that anhydrous picric acid tends to be unstable, and its impact and friction sensitivities are higher than those of TNT. Nevertheless, numerous organic and inorganic picrate salts have been prepared and their crystal structures were studied.26 Shreeve et al. reported mono and bridged azolium picrates as energetic salts.7c,27 Picrates of Werner-type cationic cobalt(III) ammine complexes have also been frequently reported, but mainly with respect to studying their solubility and/or crystallinity. A typical example is a publication by Ephraim in which the solubility of various complex cobalt(III) picrates was studied.28 These included e.g. [Co(NH3)5H2O](picrate)3, [Co(NH3)4(H2O)2](picrate)3, [Co(NH3)5X](picrate)2 (X = Cl, Br, I, NO2, NO3) as well as cis- and trans-[Co(NH3)4(NO2)2](picrate). Although the energetic properties of these compounds were not explicitly studied, it was noted that combustion analyses proved difficult due to regularly occurring explosions.28 In the course of our study, two Werner-type complex cobalt(III) picrates were prepared as outlined in Scheme 7.
image file: c4qi00094c-s7.tif
Scheme 7

Sodium picrate, prepared in situ by neutralizing picric acid with NaOH, was subsequently treated with either trans-[Co(NH3)4(NO2)2]Cl or [Co(NH3)5N3]Cl2. The products, trans-[Co(NH3)4(NO2)2](picrate)·H2O (9) and [Co(NH3)5N3](picrate)2 (10), which precipitated from the concentrated aqueous solutions, were isolated by filtration and purified by recrystallization from a minimum amount of hot water. Complex 9 was obtained in 57% yield as large, orange blocks (Fig. 16), whereas complex 10 (87% yield) formed dark red rods (Fig. 19). Complex 9 has already been mentioned in the early work by Ephraim.28 Notably, this author described no less than four different crystal forms for this compound, depending on the recrystallization conditions: (1) yellow, hair-like crystals of several centimeters in length; (2) glistening needles and platelets of rhombic shape; and (3) thick, heavy prism-like crystals. As can be seen in Fig. 16, we apparently obtained only the latter sort of crystals. Both the IR and 13C NMR data of 9 and 10 showed the typical values for the picrate anion. Both complexes were also structurally characterized by single-crystal X-ray diffraction (Table 1, Fig. 16–21 and ESI‡).


image file: c4qi00094c-f16.tif
Fig. 16 Single-crystal of trans-[Co(NH3)4(NO2)2](picrate)·H2O (9).

image file: c4qi00094c-f17.tif
Fig. 17 ORTEP drawing of trans-[Co(NH3)4(NO2)2](picrate)·H2O (9) at the 50% probability level. Selected bond lengths [Å] and angles [°]: Co(1)–N(2) 1.931(3), Co(1)–N(1) 1.943(3), Co(1)–N(3) 1.956(3), Co(1)–N(4) 1.962(3), Co(1)–N(6) 1.965(3), Co(1)–N(5) 1.967(3), Co(2)–N(8) 1.936(3), Co(2)–N(7) 1.942(3), Co(2)–N(12) 1.958(3), Co(2)–N(11) 1.959(3), Co(2)–N(10) 1.968(3), Co(2)–N(9) 1.973(3), N(2)–Co(1)–N(1) 179.39(13), N(8)–Co(2)–N(7) 179.05(13).

image file: c4qi00094c-f18.tif
Fig. 18 Packing diagram of trans-[Co(NH3)4(NO2)2](picrate)·H2O (9). View along the a-axis.

image file: c4qi00094c-f19.tif
Fig. 19 Single-crystals of [Co(NH3)5N3](picrate)2 (10).

image file: c4qi00094c-f20.tif
Fig. 20 ORTEP drawing of [Co(NH3)5N3](picrate)2 (10) at the 50% probability level. Selected bond lengths [Å] and angles [°]: Co–N(5) 1.945(2), Co–N(1) 1.950(3), Co–N(8) 1.961(2), Co–N(4) 1.967(2), Co–N(6) 1.975(2), Co–N(7) 1.980(2), N(1)–Co–N(4) 175.08(9).

image file: c4qi00094c-f21.tif
Fig. 21 Packing diagram of [Co(NH3)5N3](picrate)2 (10). View along the b-axis.

The dinitro complex 9 crystallizes in the triclinic space group P[1 with combining macron]. Fig. 17 shows that the unit cell contains two cations, two anions and two water molecules. All bond lengths and angles in the individual components show non-significant deviations from those reported in the literature.21,22Fig. 18 illustrates the supramolecular hydrogen-bonded crystal structure of 9. The two water molecules, the ammine and nitro ligands of the trans-[Co(NH3)4(NO2)2]+ cation, and the nitro groups of the picrate anion all participate in the complex hydrogen-bonded network. The azido derivative 10 also crystallizes in the triclinic space group P[1 with combining macron], but has no water of crystallization. As can be seen in Fig. 21, all ligands in the [Co(NH3)5N3]2+ dication as well as the oxygen atoms of the phenoxide and nitro groups of the picrate anions participate in the N–H⋯O and N–H⋯N hydrogen bonds forming the supramolecular network (see ESI‡ for full details).

Dipicrylamides

Dipicrylamine (2,2′,4,4′,6,6′-hexanitrodiphenylamine, Scheme 8) combines several interesting structural features in that it contains six nitro groups which are flexible and can interact and adjust in the crystal lattice and in that it has a secondary amine group which can be deprotonated with alkali and alkaline earth metal hydroxides to form water soluble salts. In the resulting dipicrylamide anion (= DPA−), partial delocalization of the negative charge mediated by the aromatic rings is possible, which may facilitate coordination of the oxygen atoms of the nitro groups with suitable metal ions.29
image file: c4qi00094c-s8.tif
Scheme 8

The ammonium salt of dipicrylamine, also known as Aurantia or Imperial Yellow, was discovered in 1874 by Gnehm and used as a yellow colorant for leather, wool, and silk until the early 20th century.30 However, this use has been terminated due to the highly toxic and explosive nature of dipicrylamine.31 Dipicrylamine can also be used for the extraction of K+ ions from sea bittern (a mixture of K+, Na+, and Mg2+).32a A related study carried out with a mixture of K+, Rb+, and Cs+ revealed that the Cs+ ion shows maximum selectivity towards DPA−.32b In fact, it has been reported that DPA− can be used for the recovery of Cs+ from radioactive wastes.33 Only recently, the structural chemistry of alkali metals and alkaline earth metals as well as ammonium and azolium dipicrylamides has been investigated in detail. All these compounds display interesting hydrogen-bonded supramolecular structures in the solid state.29

A Werner-type cobalt(III)-ammine complex of dipicrylamide was prepared according to Scheme 9 by treatment of trans-[Co(NH3)4(NO2)2]Cl with 1 equiv. of in situ-prepared NaDPA (Scheme 9).


image file: c4qi00094c-s9.tif
Scheme 9

Compound 12 was isolated in 53% yield in the form of orange, somewhat irregular blocks (Fig. 22). Both the IR spectrum and elemental analysis indicated the formation of a hydrated species. An X-ray structural analysis confirmed the presence of the monohydrate trans-[Co(NH3)4(NO2)2](DPA)·H2O (12) (Table 1, Fig. 22–24).


image file: c4qi00094c-f22.tif
Fig. 22 Single-crystals of trans-[Co(NH3)4(NO2)2](DPA)·H2O (12).

image file: c4qi00094c-f23.tif
Fig. 23 ORTEP drawing of trans-[Co(NH3)4(NO2)2](DPA)·H2O (12) at the 50% probability level. Selected bond lengths [Å] and angles [°]: Co(1)–N(16) 1.9298(18), Co(1)–N(15) 1.9353(18), Co(1)–N(19) 1.953(2), Co(1)–N(20) 1.9543(17), Co(1)–N(17) 1.9607(19), Co(1)–N(18) 1.9616(18), Co(2)–N(22) 1.9325(17), Co(2)–N(24) 1.9416(18), Co(2)–N(21) 1.9425(18), Co(2)–N(26) 1.9534(17), Co(2)–N(23) 1.9545(17), Co(2)–N(25) 1.9575(17), C(1)–N(1) 1.292(3), C(7)–N(1) 1.312(3), C(13)–N(8) 1.295(3), C(19)–N(8) 1.314(3), C(1)–N(1)–C(7)144.45(19), C(13)–N(8)–C(19)140.8(2).

image file: c4qi00094c-f24.tif
Fig. 24 Packing diagram of trans-[Co(NH3)4(NO2)2](DPA)·H2O (12). View along the a-axis.

Complex 12 crystallizes in the triclinic space group P[1 with combining macron]. Fig. 23 shows that the unit cell contains two crystallographically independent trans-[Co(NH3)4(NO2)2]+ cations and two DPA anions. The structural parameters (bond lengths and angles) in the dipicrylamide anions show only little differences when compared to those reported for the alkali, alkaline earth metals, ammonium or azolium salts of dipicrylamide.29

The non-electrolyte complex mer-[Co(en)(py)(N3)3] (13)

Well known from the early studies on Werner-type cobalt(III) azido complexes is the non-electrolyte complex mer-[Co(NH3)3(N3)3]. The highly explosive material was first reported by Linhard and Weigel in 1950.18 This dark blue-green compound was found to form in various occasions when aquo- or azido-cobalt(III) ammine complexes are treated with excess sodium azide. The best synthetic method (94% yield) involves the reaction of [Co(NH3)4(H2O)2](ClO4)3 with a large excess of NaN3. Almost quantitative yields of mer-[Co(NH3)3(N3)3] can also be obtained in a simple manner by air-oxidation of a mixture of CoSO4·7H2O, (NH4)2SO4 and NaN3 in aqueous ammonia solution. It was noted that even small amounts of mer-[Co(NH3)3(N3)3] could lead to dangerous detonations upon heating grinding or impact. Detonations were even observed when larger crystals were ground under water.18 We now succeeded in the preparation and structural characterization of a new non-electrolyte complex formally derived from cobalt(III) triazide. To an aqueous solution of [Co(en)(py)2(NH3)Cl]Cl2·H2O34 was added a ca. 20-fold excess of NaN3 and the reaction mixture was heated on a steam bath until all the water had evaporated. During the reaction a color change from red to dark green occurred and the smell of pyridine became evident. Unreacted sodium azide was easily removed by repeated washing of the dark residue with cold water. After drying in air, the new non-electrolyte complex mer-[Co(en)(py)(N3)3] (13) was isolated in 93% yield as a dark blue-green crystalline solid (Scheme 10). As expected for a non-electrolyte complex, the solubility of 13 in water is very low, although the resulting very dilute solutions show an intense dark green color.
image file: c4qi00094c-s10.tif
Scheme 10

This material was found to be unpredictably and dangerously explosive. It should thus be prepared and handled only in very small amounts and with utmost care. Compound 13 was even too dangerously explosive to be fully characterized by IR and elemental analysis. Attempts to obtain an IR spectrum of 13 were unsuccessful, because an explosion occurred upon grinding of ca. 2–3 mg with ca. 100 mg of KBr. As a derivative of the unknown cobalt triazide, compound 13 has a high nitrogen content of ca. 52% which certainly accounts for its highly explosive nature. Despite all the dangerous properties, it proved possible to structurally verify the nature of 13 by single-crystal X-ray diffraction. Even this task was met by major obstacles. Recrystallization from hot water was impossible due to the low solubility of 13. Thus small portions of the originally obtained material were spread on glass sample holders and searched under a microscope for suitable crystals. It turned out that most of the crystals were strongly intergrown, with most of them having the appearance of Christmas trees. Notably, like mer-[Co(NH3)3(N3)3],18 the crystals of 13 were blue-green dichroitic. Finally, a small blue-green crystal fragment was found to be suitable for X-ray diffraction (Table 1 and Fig. 25 and 26; see also ESI‡). As shown in Fig. 25, the three azide ligands in 13 are arranged in meridional positions as in the parent non-electrolyte mer-[Co(NH3)3(N3)3].18 The Co–N bond lengths to the two opposing azide ligands are identical (Co(1)–N(4) 1.946(2), Co(1)–N(2) 1.948(2) Å), whereas that to the azide ligands trans to an amino group of ethylenediamine is slightly longer (Co(1)–N(7) 1.962(2) Å). The packing diagram of 13 shows a polymeric hydrogen-bonded network (Fig. 26). In this case, supramolecular association of the complex molecules occurs only via N⋯H–N hydrogen bonds between terminal azide nitrogen atoms and the NH2 groups of the coordinated ethylenediamine.


image file: c4qi00094c-f25.tif
Fig. 25 ORTEP drawing of [Co(en)(py)(N3)3] (13) at the 50% probability level. Selected bond lengths [Å] and angles [°]: Co(1)–N(4) 1.946(2), Co(1)–N(2) 1.948(2), Co(1)–N(7) 1.962(2), Co(1)–N(10) 1.969(2), Co(1)–N(3) 1.973(2), Co(1)–N(1) 1.975(2), N(2)–Co(1)–N(1) 179.39(10), N(4)–Co(1)–N(10) 174.59(10).

image file: c4qi00094c-f26.tif
Fig. 26 Packing diagram of [Co(en)(py)(N3)3] (13). View along the a-axis.

Energetic properties of the new cobalt(III) complexes

The methods for testing primary explosives have just been summarized in a very informative short review article by Mehta et al.35 In addition to a simple combustion test, the impact and friction sensitivity were tested according to established BAM methods using a BAM drophammer and BAM friction tester (Fig. 27 and 28).1c The initial test results of the energetic properties of seven cobalt(III) complexes prepared in the course of this study are listed in Table 2. Not included in the table is the dipicrylamide derivative 12 because it was found to be insensitive to both impact and friction. Also not included is the non-electrolyte complex mer-[Co(en)(py)(N3)3] (13). This complex was found to be too sensitive to be handled safely. All tests were repeated six times over a storage period of 30 days. These test series revealed no significant deviations from the originally measured values, indicating a good long-term stability of the title compounds. Moreover, the drophammer tests were repeated in the temperature range of −55 °C to 20 °C in order to get an impression of the low-temperature performance. For example, hunting and sports ammunition is expected to show good performance at temperatures down to −25 °C, whereas military ammunition should function even at temperatures as low as −55 °C. Thus, drophammer tests of all seven compounds were performed at −55 °C, −30 °C, 0 °C, 10 °C, and 20 °C. In all cases these tests revealed an unexpected increase of the impact sensitivity by 1–2 J at temperatures below 0 °C which remained constant to −55 °C. Although this effect may be small, it is significant and reproducible. In summary, all energetic cobalt(III) complexes showed a stable performance over the entire temperature range of 75 degrees.
image file: c4qi00094c-f27.tif
Fig. 27 BAM drophammer setup used in this study.

image file: c4qi00094c-f28.tif
Fig. 28 BAM friction test setup used in this study.
Table 2 Energetic properties of 2, 3, 4, 5, 7, 9, and 10
Compound 2 3 4 5 7 9 10
M (g mol−1) 392.23 452.28 602.22 368.21 351.12 465.18 642.30
ρ, g cm−3 1.605 1.671 1.989 1.726 1.958 1.869 1.844
Impact sensitivity/J 8 >10 8 3.5–5 5 8 7.5
Friction sensitivity (N) >216 >360 >216 216 >216 >216 >216
Combustion test Deflagr. Explosion Explosion Explosion Deflagr. Explosion Explosion
N (%) 57.43 49.55 51.17 68.47 43.88 27.10 30.53
Ω (%) −55.87 −82.64 −26.56 −49.97 −13.67 −30.95 −26.15

As shown in Table 2, all four azotetrazolates were found to be impact-sensitive. For the azido complex 5, the drophammer test revealed that this compound is very sensitive to impact. The value of 3.5–5 J for 5 is comparable to those found for Pb(N3)2 (3.0–6.5 J) or lead(II) styphnate (2.5–5.0 J),1b so that 5 can be classified as a primary explosive. This is not surprising in view of the fact that 5 has the highest nitrogen content (68.47%) of all compounds studied. In contrast, all four compounds showed only low sensitivity to friction, with compound 3 being more or less insensitive. Three of the samples (3, 4, and 5) exploded upon ignition with a flame, while a sample of compound 2 showed only deflagration.

The values for the 5-nitrotetrazolate complex 7 show that with a low value of 5 J the impact sensitivity of this compound is comparable to that of lead(II) azide. Thus this compound can also be classified as a primary explosive. This, combined with a good oxygen balance Ω of −13.67% and a relatively high nitrogen content of ∼44% makes compound 7 a promising candidate for further testing. In the flame test, a sample of complex 7 showed deflagration.

Both picrates 9 and 10 can also be classified as primary explosives. With values of 8 (9) and 7.5 (10) they are slightly less sensitive to impact than lead(II) styphnate or lead(II) azide and at the same time much less friction-sensitive. However, both samples exploded upon ignition with a flame. With 27.10% (9) and 30.53% (10) the nitrogen content is still quite good, while the negative oxygen balance can be explained by the high carbon content of these picrates. In view of the easy accessibility of these and related complexes, such Werner-type cobalt(III) picrates certainly merit further investigation as alternative energetic materials. As mentioned above, the dipicrylamide complex 12 was found to be insensitive to both impact and friction (>40 J and >360 N, resp.). This is in agreement with recent findings by Zhou et al. who reported that the impact sensitivities of various ammonium and azolium dipicrylamides are in the range of that of the secondary explosive TNT.29c In view of the known high toxicity of dipicrylamine,29c,30 this energetic anion does not appear to be a useful alternative for lead(II)-containing explosives anyway. In contrast, the non-electrolyte complex 13 could not be safely tested as even minor samples of 2–3 mg could explode in an unpredictable manner.

Conclusions

In summarizing the work reported here, we have investigated the synthesis, structures, and energetic properties of a series of novel Werner-type cobalt(III) ammine complexes comprising the energetic anions azotetrazolate, nitrotetrazolate, picrate and dipicrylamide in the outer sphere, i.e. not directly coordinated to the central Co3+ ion. The title compounds are accessible in a straightforward manner by simple salt metathesis reactions using readily available starting materials. Also easily prepared, though unpredictably and dangerously explosive, is the new dark blue-green non-electrolyte complex mer-[Co(en)(py)(N3)3] (13). The crystal structures of all new complexes are characterized by extensive hydrogen-bonded networks. In addition to the structural authentication by X-ray diffraction, the energetic properties of these explosive Werner-type cobalt(III) complexes have been tested. The tests revealed that several of the title complexes can be classified as primary explosives. Particularly promising in that respect are the compounds 5 and 10 which contain the [Co(NH3)5N3]+ cation, as well as the nitrotetrazolate trans-[Co(NH3)4(NO2)2](NT)·H2O (7). All tested samples showed excellent long-term storage and low-temperature stability.

Experimental section

General procedures

The starting materials [Co(NH3)5NO2]Cl2,36 [Co(NH3)4(py)NO2]Cl2 (py = pyridine),37trans-[Co(NH3)4(NO2)2]Cl,38 [Co(NH3)5N3]Cl2,13 [Co(en)(py)2(NH3)Cl]Cl2·H2O,34 Na2C2N10·5H2O, (1),20 and NaNT (6)21e,25 were prepared according to published procedures. Picric acid, dipicrylamide and NaN3 were obtained from commercial sources and used as received. IR (KBr) spectra were measured using a Perkin-Elmer FT-IR 2000 spectrometer. NMR spectra were recorded on a DPX 400 (Bruker) or AVANCE 600 (Bruker-Biospin) spectrometer. Microanalyses of the compounds were performed using Leco CHNS 023 apparatus.

Single crystal X-ray crystallography

The intensity data of 2, 3, 4, 5, 7, 10, and 13 were collected on a Stoe IPDS 2 T diffractometer with MoKα radiation. The data were collected with the Stoe XAREA39 program using ω-scans. The space groups were determined with the XRED3239 program. The intensity data of 9 and 12 were registered on an Oxford Diffraction Nova A diffractometer using mirror-focused CuKα radiation. Absorption corrections were applied using the multi-scan method. The structures were solved by direct methods (SHELXS-97) and refined by full matrix least-squares methods on F2 using SHELXL-97.40

Cautionary note

All compounds described in this study are sensitive energetic materials which should only be synthesized and manipulated on a small (<250 mg) scale using proper safety equipment including thick leather gloves and jackets, face shields and blast screens, ear plugs and plastic or Teflon laboratory equipment. Care should be taken not to extensively dry or heat these materials as the anhydrous complexes are even more sensitive and prone to explosion on manipulation. In particular, the non-electrolyte complex 13 is extremely sensitive to impact and friction and should be handled with utmost care.

Synthesis of pentaammine-nitro-cobalt(III)-azotetrazolate-dihydrate, [Co(NH3)5NO2](C2N10)·2H2O (2). To a solution of pentaammine-nitro-cobalt(III)-chloride (0.20 g, 0.77 mmol) in a minimum amount of warm water (40 °C, ca. 10 mL) was added 0.24 g (0.80 mmol) Na2C2N10·5H2O (1) in 10 mL water. Undisturbed standing at r.t. for 24 h afforded large, clear yellow crystals suitable for X-ray diffraction (Fig. 1). Yield: 0.23 g (74%). M.p. > 290 °C (violent dec.). 13C{1H} NMR (100.6 MHz, DMSO-d6, 20 °C): δ 173.1 ([N4C–N[double bond, length as m-dash]N–CN4]2−). IR (KBr, cm−1): νmax 3431 (vs), 2106 (m), 1628 (m), 1452 (s), 1402 (s), 1202 (m), 1164 (m), 1065 (m), 1042 (m), 866 (m), 775 (m), 740 (s), 564 (s). Anal. Calcd for C2H19CoN16O4 (392.23 g mol−1): C, 6.16; H, 4.91; N, 57.43. Found: C, 6.02; H, 4.76; N, 56.78.
Synthesis of trans-tetraammine-nitro-pyridine-cobalt(III)-azotetrazolate-dihydrate, [Co(NH3)5NO2](C2N10)·2H2O (3). In a similar manner, trans-tetraammine-nitro-pyridine-cobalt(III)-dichloride (0.11 g, 0.34 mmol) was allowed to react with 0.10 g (0.33 mmol) Na2C2N10·5H2O (1) in ca. 15 mL water. Undisturbed standing at r.t. for 24 h afforded yellow-orange crystals suitable for X-ray diffraction (Fig. 4). Yield: 0.21 g (46%). M.p. > 260–263 °C (violent dec.). 13C{1H} NMR (100.6 MHz, DMSO-d6, 20 °C): δ 173.1 ([N4C–N[double bond, length as m-dash]N–CN4]2−), 158.2 (2 C, py), 135.1 (1 C, py), 127.2 (2 C, py). IR (KBr, cm−1): νmax 3544 (vs), 3430 (vs), 2445 (m), 2108 (m), 1626 (s), 1506 (m), 1452 (m), 1403 (s), 1203 (m), 1165 (m), 1096 (m), 1064 (m), 1043 (m), 776 (m), 741 (s), 566 (s). Anal. Calcd for C7H21CoN16O4 (452.28 g mol−1): C, 18.59; H, 4.68; N, 49.55. Found: C, 20.01; H, 4.20; N, 49.37.
Synthesis of bis[trans-tetraammine-dinitro-cobalt(III)]-azotetrazolate, trans-[Co(NH3)4(NO2)2]2(C2N10) (4). Reaction between trans-[Co(NH3)4(NO2)2]Cl (0.20 g, 0.79 mmol) and 1 (0.11 g, 0.37 mmol) afforded 0.19 g (87%) 4 as clear yellow single-crystals suitable for X-ray diffraction (Fig. 7). M.p. > 250 °C (violent dec.). 13C{1H} NMR (100.6 MHz, DMSO-d6, 20 °C): δ 173.1 ([N4C–N[double bond, length as m-dash]N–CN4]2−). IR (KBr, cm−1): νmax 3331 (m), 2445 (m), 2106 (m), 1628 (m), 1452 (m), 1375 (s), 1202 (m), 1164 (m), 1065 (m), 1042 (m), 866 (m), 775 (m), 740 (m), 692 (m), 564 (m), 464 (m). Anal. Calcd for C2H24Co2N22O8 (602.22 g mol−1): C, 3.99; H, 4.02; N, 51.17. Found: C, 3.68; H, 4.10; N, 53.01.
Synthesis of pentaammine-azido-cobalt(III)-azotetrazolate-monohydrate, [Co(NH3)5N3](C2N10)·H2O (5). Reaction between [Co(NH3)5N3]Cl2 (0.35 g, 1.37 mmol) and 1 (0.41 g, 1.37 mmol) afforded a deep purple reaction mixture from which 5 crystallized after 1 day in the form of purple, rod-like single-crystals which were suitable for X-ray diffraction (Fig. 10). Yield: 0.44 g (88%). M.p. 256 °C (violent dec.). 13C{1H} NMR (100.6 MHz, DMSO-d6, 20 °C): δ 173.2 ([N4C–N[double bond, length as m-dash]N–CN4]2−). IR (KBr, cm−1): νmax 3275 (vs), 2346 (s), 2050 (vs), 1631 (vs), 1558 (vs), 1385 (vs), 1315 (vs), 1152 (s), 1041 (s), 830 (vs), 771 (vs), 734 (vs), 557 (s). Anal. Calcd for C2H17CoN18O (368.21 g mol−1): C, 6.52; H, 4.65; N, 68.47. Found: C, 6.66; H, 4.02; N, 70.99.
Synthesis of trans-tetraammine-dinitro-cobalt(III)-5-nitrotetrazolate-monohydrate, trans-[Co(NH3)4(NO2)2](NT)·H2O (7). Similar treatment of trans-[Co(NH3)4(NO2)2]Cl (0.15 g, 0.58 mmol) with 6 (0.10 g, 0.58 mmol) in a minimum amount of water (ca. 10 mL) afforded 0.10 g (64%) of 7 as orange, block-like single crystals with a somewhat milky appearance (Fig. 13), which were nevertheless suitable for X-ray diffraction. M.p. ca. 230 °C (violent dec.). 13C{1H} NMR (100.6 MHz, D2O, 20 °C): δ 165.2 (1 C, NO2–CN4). IR (KBr, cm−1): νmax 3306 (s), 1622 (m), 1550 (s), 1385 (vs), 1322 (vs), 1282 (s), 819 (m), 623 (m), 503 (m). Anal. Calcd for CH14CoN11O7 (351.12 g mol−1): C, 3.42; H, 4.02; N, 43.88. Found: C, 3.09; H, 3.88; N, 42.90.
Synthesis of trans-tetraammine-dinitro-cobalt(III)-picrate-monohydrate, trans-[Co(NH3)4(NO2)2](picrate)·H2O (9). Reaction of trans-[Co(NH3)4(NO2)2]Cl (0.10 g, 0.39 mmol) with sodium picrate (0.39 mmol, made in situ from 0.09 g of picric acid and NaOH) in a minimum amount of water (ca. 10 mL) first gave an orange precipitate. Recrystallization of the crude product from hot water (ca. 8 mL) afforded 0.12 g (66%) of 9 as orange, block-like single-crystals (Fig. 16) which were suitable for X-ray diffraction. M.p. ca. 285 °C (violent dec.). 13C{1H} NMR (20 °C, D2O, 100 MHz): δ (100.6 MHz, D2O, 20 °C): δ 160.9 (1 C; C1), 141.9 (2 C; C2, C6), 125.3 (2 C; C3, C5), 124.3 (1 C; C4). IR (KBr, cm−1): νmax 3629 (m), 3522 (s), 3308 (vs), 1635 (vs), 1556 (vs), 1510 (s), 1474 (s), 1435 (s), 1400 (vs), 1366 (vs), 1321 (vs), 1250 (s), 1162 (s), 1086 (s), 946 (m), 929 (m), 911 (m), 818 (s), 789 (m), 747 (m), 709 (s), 602 (m), 507 (m). Anal. Calcd for C6H16CoN9O12 (465.18 g mol−1): C, 15.49; H, 3.47; N, 27.10. Found: C, 15.45; H, 3.67; N, 27.10.
Synthesis of pentaammine-azido-cobalt(III)-dipicrate, [Co(NH3)5N3](picrate)2 (10). Analogous reaction of [Co(NH3)5N3]Cl2 (0.10 g, 0.39 mmol) with sodium picrate (0.78 mmol, made in situ from 0.18 g of picric acid and NaOH) in a minimum amount of water (ca. 10 mL) afforded a dark red-purple precipitate. Recrystallization from hot water (ca. 10 mL) gave 0.22 g (87%) of 10 as clear, dark red, rod-like single-crystals (Fig. 19) which were suitable for X-ray diffraction. M.p. ca. 195 °C (violent dec.). 13C{1H} NMR (100.6 MHz, D2O, 20 °C): δ 160.9 (1 C; C1), 141.8 (2 C; C2, C6), 125.3 (2 C; C3, C5), 124.0 (1 C; C4). IR (KBr, cm−1): νmax 3271 (vs), 2056 (vs), 1639 (s), 1554 (s), 1433 (m), 1368 (m), 1320 (vs), 1285 (s), 1163 (m), 1083 (m), 910 (m), 843 (s), 747 (m), 712 (m), 662 (m), 579 (m), 463 (m). Anal. Calcd for C12H19CoN14O14 (642.30 g mol−1): C, 22.44; H, 2.98; N, 30.53. Found: C, 23.40; H, 3.04; N, 30.48.
Synthesis of trans-tetraammine-dinitro-cobalt(III)-dipicrylamide-monohydrate, trans-[Co(NH3)4(NO2)2](DPA)·H2O (12). To a suspension of dipicrylamine (1.0 g, 2.27 mmol) in 10 mL water were added two pellets of solid NaOH to give a dark red solution of NaDPA.33 A concentrated solution of trans-[Co(NH3)4(NO2)2]Cl (0.58 g, 2.27 mmol) in 10 mL water was added and the dark red reaction mixture was allowed to stand undisturbed for 1 week. This produced bright orange crystals of 12 in 53% yield (0.42 g). M.p. > 350 °C (dec.). IR (KBr, cm−1): νmax 3436 (m), 3360 (m), 2430 (w), 1790 (m), 1665 (m), 1587 (s), 1498 (m), 1383 (vs), 1320 (vs), 1300 (s), 1262 (m), 1982 (m), 910 (w), 836 (m), 768 (w), 740 (w), 719 (m), 509 (w). Anal. Calcd for C24H38Co2N26O35 (1368.59 g mol−1): C, 21.06; H, 2.80; N, 26.61. Found: C, 21.00; H, 2.55; N, 24.98.
Synthesis of mer-triazido-ethylenediamine-pyridine-cobalt(III), mer-[Co(en)(py)(N3)3] (13). 0.30 g (0.72 mmol) of [Co(en)(py)2(NH3)Cl]Cl2·H2O were dissolved in 25 mL H2O and 1.00 g (15.38 mmol) NaN3 was added as a solid. The reaction mixture was heated in a steam bath without stirring until the water had evaporated completely. During this time the color of the solution changed from red to dark green and the smell of pyridine became evident. The residue was swirled five times with 20 mL-portions of water and the aqueous solutions were carefully decanted in order to redissolve and separate the unreacted NaN3. After drying the residue in air, 0.22 g (93%) of 13 were obtained as dark blue-green, feather-like crystals. Due to its highly explosive nature, melting/decomposition point, IR spectra, and elemental analysis data could not be obtained for 13. Anal. Calcd for C7H13CoN12 (324.19 g mol−1): C, 25.93; H, 4.04; N, 51.85.

Acknowledgements

Financial support by the Otto-von-Guericke-Universität Magdeburg is gratefully acknowledged.

Notes and references

  1. (a) J. Boileau, in Explosives, Ullmanns Encyclopedia of Industrial Chemistry, Wiley-Interscience, 2003 Search PubMed; (b) J. Köhler, R. Meyer and A. Homburg, Explosivstoffe, Wiley-VCH, Weinheim, 10th edn, 2008 Search PubMed; (c) T. M. Klapötke, Chemistry of High-Energy Materials, Walter de Gruyter, Berlin/New York, 2011, and references cited therein Search PubMed.
  2. W. Beck, J. Evers, M. Göbel, G. Oehlinger and T. M. Klapötke, Z. Anorg. Allg. Chem., 2007, 633, 1417–1422 CrossRef CAS PubMed , and references cited therein.
  3. (a) T. Curtius, Chem. Ber., 1891, 24, 3345–3346 CrossRef PubMed; (b) T. Urbanski, Chemistry and Technology of Explosives, Macmillan Publishing Company, Oxford, U.K., 1967, vol. 4 Search PubMed; (c) T. Costain and F. B. Wells, in Energetic Materials, Vol. 2: Technology of the Inorganic Azides, ed. H. D. Fair and R. F. Walker, Plenum Press, New York, NY, USA, 1977 Search PubMed.
  4. E. V. Herz, Beilstein, 1914, 6, 405 Search PubMed.
  5. M. E. Barsan and A. Miller, Lead Health Hazard Evaluation, HETA Report No. 91-0346-2572, National Institute for Occupational Safety and Health, Cincinnati, Ohia, 1996.
  6. (a) J. Giles, Nature, 2004, 427, 581–582 Search PubMed; (b) M. H. V. Huynh, M. A. Hiskey, T. J. Meyer and M. Wetzler, Proc. Natl. Acad. Sci. U. S. A., 2006, 103, 5409–5412 CrossRef CAS PubMed; (c) M. H. V. Huynh, M. D. Coburn, T. J. Meyer and M. Wetzler, Proc. Natl. Acad. Sci. U. S. A., 2006, 103, 10322–10327 CrossRef CAS PubMed.
  7. (a) H. Xue, Y. Gao, B. Twamley and J. M. Shreeve, Inorg. Chem., 2005, 44, 5068–5072 CrossRef CAS PubMed; (b) C. Ye, J.-C. Xiao, B. Twamley and J. M. Shreeve, Chem. Commun., 2005, 2750–2752 RSC; (c) R. P. Singh, R. D. Verma, D. T. Meshri and J. M. Shreeve, Angew. Chem., Int. Ed., 2006, 45, 3584–3601 CrossRef CAS PubMed; (d) G. Steinhauser and T. M. Klapötke, Angew. Chem., Int. Ed., 2008, 47, 3330–3347 CrossRef CAS PubMed; (e) H. Gao and J. M. Shreeve, Chem. Rev., 2011, 111, 7377–7436 CrossRef CAS PubMed; (f) Q. Zhang and J. M. Shreeve, Angew. Chem., Int. Ed., 2013, 52, 8792–8794 CrossRef CAS PubMed.
  8. J. W. Fronabarger, M. D. Williams, W. B. Sanborn, J. G. Bragg, D. A. Parrish and M. Bichay, Propellants Explos., Pyrotech., 2011, 36, 541–550 CrossRef CAS PubMed.
  9. E. J. Graeber and B. Morosin, Acta Crystallogr., Sect. C: Cryst. Struct. Commun., 1983, 39, 567–570 CrossRef.
  10. A. V. Smirnov, M. A. Ilyushin and I. V. Tselinskii, Russ. J. Appl. Chem., 2004, 77, 794–796 CrossRef CAS.
  11. (a) B. Morosin, R. G. Dunn, R. Assink, T. M. Massis, J. Fronabarger and E. N. Duesler, Acta Crystallogr., Sect. C: Cryst. Struct. Commun., 1997, 53, 1609–1611 Search PubMed; (b) A. Yu. Zhilin, M. A. Ilyushin, I. V. Tselinskii and A. S. Brykov, Russ. J. Appl. Chem., 2001, 74, 96–99 CrossRef.
  12. J. Sass, Int. J. Occup. Environ. Health, 2004, 10, 330–334 CrossRef CAS PubMed.
  13. M. Linhard and H. Flygare, Z. Anorg. Allg. Chem., 1950, 262, 328–343 CrossRef CAS PubMed.
  14. M. Linhard, M. Weigel and H. Flygare, Z. Anorg. Allg. Chem., 1950, 263, 233–244 CrossRef CAS PubMed.
  15. P. J. Staples and M. L. Tobe, J. Chem. Soc., 1960, 4812–4820 RSC.
  16. H. Siebert and R. Macht, Z. Anorg. Allg. Chem., 1982, 489, 77–84 CrossRef CAS PubMed.
  17. L. F. Druding, F. D. Sancilio and D. M. Lukaszewski, Inorg. Chem., 1975, 14, 1365–1369 CrossRef CAS.
  18. M. Linhard and M. Weigel, Z. Anorg. Allg. Chem., 1950, 263, 245–252 CrossRef CAS PubMed.
  19. Selected references: (a) A. Hammerl, T. M. Klapötke, H. Nöth, M. Warchhold, G. Holl, M. Kaiser and U. Ticmanis, Inorg. Chem., 2001, 40, 3570–3575 Search PubMed; (b) A. Hammerl, G. Holl, T. M. Klapötke, P. Mayer, H. Nöth, H. Piotrowski and M. Warchhold, Eur. J. Inorg. Chem., 2002, 834–845 CrossRef CAS, and references cited therein; (c) A. Hammerl, M. A. Hiskey, G. Holl, T. M. Klapötke, K. Polborn, J. Stiersdorfer and J. J. Weigand, Chem. Mater., 2005, 17, 3784–3793 CrossRef CAS; (d) T. M. Klapötke and C. M. Sabaté, Chem. Mater., 2008, 20, 1750–1763 CrossRef; (e) T. M. Klapötke and C. M. Sabaté, New J. Chem., 2009, 33, 1605 RSC; (f) G.-H. Tao, B. Twamley and J. Shreeve, Inorg. Chem., 2009, 48, 9918–9923 CrossRef CAS PubMed; (g) G. Steinhauser, G. Giester, N. Leopold, C. Wagner, M. Villa and A. Musilek, Helv. Chim. Acta, 2010, 93, 183–202 CrossRef CAS PubMed; (h) K. F. Warner and R. H. Granholm, J. Energ. Mater., 2011, 29, 1–6 CrossRef CAS.
  20. J. Thiele, Liebigs Ann., 1898, 303, 57–75 Search PubMed.
  21. (a) T. M. Klapötke, K. Karaghiosoff, P. Mayer, A. Penger and J. M. Welch, Propellants Explos., Pyrotech., 2006, 31, 188–195 CrossRef PubMed; (b) C. Darwich, T. M. Klapötke, J. M. Welch and M. Suceska, Propellants Explos., Pyrotech., 2007, 32, 235–243 CrossRef CAS PubMed; (c) T. M. Klapötke, C. M. Sabaté and M. Rasp, J. Mater. Chem., 2009, 19, 2240–2252 RSC; (d) T. M. Klapötke, C. M. Sabaté and J. M. Welch, Heteroat. Chem., 2009, 20, 35–44 Search PubMed; (e) T. M. Klapötke, C. M. Sabaté and J. M. Welch, Eur. J. Inorg. Chem., 2009, 769–776 CrossRef PubMed.
  22. (a) J. Charalambous, G. C. Georgiou, K. Henrick, L. R. Bates and M. Healey, Acta Crystallogr., Sect. C: Cryst. Struct. Commun., 1987, C43, 659–661 CrossRef CAS; (b) B. Morosin, R. G. Dunn, R. Assink, T. M. Massis, J. Fronabarger and E. N. Duesler, Acta Crystallogr., Sect. C: Cryst. Struct. Commun., 1997, C53, 1609–1611 CAS; (c) A. Y. Zhilin, M. A. Ilyushin, I. V. Tselinski and A. S. Brykov, Russ. J. Appl. Chem., 2001, 74, 99–102 Search PubMed; (d) M. H. V. Huynh, M. A. Hiskey, T. J. Meyer and M. Wetzler, Proc. Natl. Acad. Sci. U. S. A., 2006, 103, 5409–5412 CrossRef CAS PubMed; (e) M. H. V. Huynh, M. D. Coburn, T. J. Meyer and M. Wetzler, Proc. Natl. Acad. Sci. U. S. A., 2006, 103, 10322–10327 Search PubMed; (f) T. M. Klapötke and C. M. Sabaté, Dalton Trans., 2009, 1835–1841 RSC; (g) T. M. Klapötke and C. M. Sabaté, Cent. Eur. J. Energ. Mater., 2010, 7, 161–173 Search PubMed.
  23. G. Stock, C. G. Hrib, R. Deblitz, M. Kühling, G. Plenikowski and F. T. Edelmann, Inorg. Chem. Commun., 2014, 43, 90–93 Search PubMed.
  24. (a) T. M. Klapötke, C. M. Sabaté and J. M. Welch, Dalton Trans., 2008, 6372–6380 RSC; (b) N. Zaborenko, E. R. Murphy, J. G. Kralj and K. F. Jensen, Ind. Eng. Chem. Res., 2010, 49, 4132–4139 Search PubMed; (c) T. M. Klapötke, D. G. Piercey, N. Mehta, K. D. Oyler, M. Jorgensen, S. Lenahan, J. S. Salan, J. W. Fronabarger and M. D. Williams, Z. Anorg. Allg. Chem., 2013, 639, 681–688 CrossRef PubMed.
  25. (a) E. von Herz, US Patent, 2,066,954, 1937 Search PubMed; (b) W. H. Gilligan and M. J. Kamlet, US Patent, 4,093,623, 1978 Search PubMed.
  26. (a) G. Singh, I. P. S. Kapoor, M. Mannan and S. K. Tiwari, J. Hazard. Mater., 1999, 68, 155–178 CrossRef CAS; (b) G. Singh, I. P. S. Kapoor, S. M. Mannan and J. Kaur, J. Hazard. Mater., 2000, 79, 1–18 CrossRef CAS , and references cited therein.
  27. C.-M. Jin, C. Ye, C. Piekarski, B. Twamley and J. M. Shreeve, Eur. J. Inorg. Chem., 2005, 3760–3767 CrossRef CAS PubMed.
  28. F. Ephraim, Ber. Dtsch. Chem. Ges., 1923, 56, 1530–1542 Search PubMed.
  29. (a) S. Eringathodi, P. Agnihotri, B. Ganguly, P. Bhatt, P. S. Subramanian, P. Paul and P. K. Gosh, Eur. J. Inorg. Chem., 2005, 2198–2205 CrossRef CAS PubMed; (b) P. Agnihotri, S. Patra, E. Suresh, P. Paul and P. K. Ghosh, Eur. J. Inorg. Chem., 2006, 4938–4944 Search PubMed; (c) H. Huang, Z. Zhou, J. Song, L. Liang, K. Wang, D. Cao, W. Sun, X. Dong and M. Xue, Chem. – Eur. J., 2011, 17, 13593–13602 CrossRef CAS PubMed.
  30. (a) R. Gnehm, Ber. Dtsch. Chem. Ges., 1874, 7, 1399–1401 CrossRef PubMed; (b) R. Gnehm, Ber. Dtsch. Chem. Ges., 1876, 9, 1245–1246 CrossRef PubMed.
  31. (a) I. Rokstad, Acta Derm. Venerol., 1946, 26, 350 Search PubMed; (b) F. Seifert, Vom Wasser, 1949, 17, 89–92 CAS; (c) J. Kjelland, Chem. Ind., 1971, 1309–1313 Search PubMed.
  32. (a) A. Winkel and D. I. H. Maas, Angew. Chem., Int. Ed. Engl., 1936, 49, 827–830 CrossRef CAS PubMed; (b) L. A. Bray, E. C. Martin, R. L. Moore and W. A. Richland, U. S. Atomic Energy Commun., HW-SA-2620, 1962, p. 8.
  33. (a) M. Kyrs, J. Pelcik and P. Polansky, Collect. Czechoslov. Chem. Commun., 1960, 25, 2642 CrossRef CAS; (b) V. Kourim and J. Krtil, Proc. U. N. Intern. Conf. Peaceful Uses Atomic Energy, Geneva, 2nd edn, 1958, vol. 28, p. 139.
  34. F. Edelmann and U. Behrens, Z. Anorg. Allg. Chem., 1977, 432, 58–66 CrossRef CAS PubMed.
  35. N. Mehta, K. Oyler, G. Cheng, A. Shah, J. Marin and K. Yee, Z. Anorg. Allg. Chem., 2014, 640, 1309–1313 CrossRef CAS PubMed.
  36. S. M. Jörgensen, Z. Anorg. Allg. Chem., 1894, 5, 174–196 Search PubMed.
  37. A. Ganiev, Zh. Neorg. Khim., 1962, 7, 261–264 CAS.
  38. S. M. Jörgensen, Z. Anorg. Allg. Chem., 1898, 17, 455–479 Search PubMed.
  39. Stoe, XAREA Program for Xray Crystal Data collection, (XRED32 included in XAREA), Stoe, 2002 Search PubMed.
  40. (a) G. M. Sheldrick, SHELXL-97 Program for Crystal Structure Refinement, Universität Göttingen, Germany, 1997 Search PubMed; (b) G. M. Sheldrick, SHELXS-97 Program for Crystal Structure Solution, Universität Göttingen, Germany, 1997 Search PubMed.

Footnotes

† Dedicated to Professor Konrad Seppelt on the occasion of his 70th birthday.
‡ Electronic supplementary information (ESI) available: ORTEP drawings and complete X-ray crystallographic data for 2, 3, 4, 5, 7, 9, 10, 12, and 13 in PDF and CIF format. CCDC 993736–993744. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/c4qi00094c
This journal is © the Partner Organisations 2014