Issue 27, 2012

Unintentional doping in GaN

Abstract

The optimisation of GaN-based electronic and optoelectronic devices requires control over the doping of the material. However, device performance, particular for lateral transport electronic devices, is degraded by the presence of unintentional doping, which for heteroepitaxial GaN layers grown in the polar (0001) orientation is mainly confined to a layer adjacent to the GaN/substrate interface. The use of scanning capacitance microscopy (SCM) has demonstrated that this layer forms due to the high rate of incorporation of gas phase impurities, primarily oxygen, during the early stages of growth, when N-rich semi-polar facets are often present. The presence of such facets leads to additional unintentional doping when defect density reduction strategies involving a three-dimensional growth phase (such as epitaxial lateral overgrowth) are employed. Many semi-polar epitaxial layers, on the other hand, exhibit significant unintentional doping throughout their thickness, except when a three-dimensional growth phase is introduced to aid in defect density reduction resulting in the presence of (0001) and non-polar facets which incorporate less dopant. Non-polar epitaxial samples exhibit behaviour more similar to (0001)-oriented material, but oxygen diffusion from the sapphire substrate along prismatic stacking faults also locally affects the extent of the unintentional doping in this case.

Graphical abstract: Unintentional doping in GaN

Article information

Article type
Perspective
Submitted
28 Mar 2012
Accepted
18 May 2012
First published
18 May 2012

Phys. Chem. Chem. Phys., 2012,14, 9558-9573

Unintentional doping in GaN

T. Zhu and R. A. Oliver, Phys. Chem. Chem. Phys., 2012, 14, 9558 DOI: 10.1039/C2CP40998D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements