Issue 23, 2018

Introducing optically polarizable molecules into perovskite solar cells by simultaneously enhanced spin–orbital coupling, suppressed non-radiative recombination and improved transport balance towards enhancing photovoltaic actions

Abstract

By considering facile molecular diffusion and optically generated electrical polarization, this article reports, for the first time, that directly introducing optically polarizable non-fullerene electron acceptor ITIC molecules into organic–inorganic hybrid perovskite (MAPbI3−xClx) films with uniform and non-uniform gradient distributions can surprisingly enhance spin–orbital coupling (SOC) with the consequence of increasing the conversion from photogenerated spin-singlets to spin-triplets, boosting the spin states available for photovoltaic actions and enhancing the power conversion efficiency (PCE) from 15.3% to 17.2% with a Jsc of 20.2 mA cm−2, a Voc of 1.08 V, and a FF of 79% in perovskite solar cells [ITO/PEDOT:PSS/MAPbI3−xClx/PCBM/PEI/Ag]. Specifically, we find that dispersing ITIC molecules can largely decrease the ΔJsc (photocurrent difference) generated by switching the photoexcitation from linear to circular polarization with the same intensity. This phenomenon provides direct evidence that dispersed optically polarizable ITIC molecules can increase the SOC in organic–inorganic hybrid perovskites through interaction between introduced electrical polarization and SOC. Furthermore, impedance studies indicate that dispersing ITIC molecules can decrease the density of trap states by passivating the grain boundary defects and simultaneously increases the carrier mobilities. Consequently, non-radiative recombination is reduced upon decreasing the density of trap states through dispersing the ITIC molecules, according to transient photoluminescence studies. The UV-Vis and FTIR spectral studies indicate formation of a bond between Pb, N and O, showing a direct interaction between the hybrid perovskite MAPbI3−xClx and dispersed ITIC molecules. Clearly, introducing optically polarizable non-fullerene electron acceptor molecules presents a new opportunity to enhance photovoltaic actions in perovskite solar cells through SOC and grain boundary passivation effects.

Graphical abstract: Introducing optically polarizable molecules into perovskite solar cells by simultaneously enhanced spin–orbital coupling, suppressed non-radiative recombination and improved transport balance towards enhancing photovoltaic actions

Supplementary files

Article information

Article type
Paper
Submitted
01 Mar 2018
Accepted
13 Apr 2018
First published
13 Apr 2018

J. Mater. Chem. C, 2018,6, 6164-6171

Introducing optically polarizable molecules into perovskite solar cells by simultaneously enhanced spin–orbital coupling, suppressed non-radiative recombination and improved transport balance towards enhancing photovoltaic actions

C. Han, H. Yu, J. Duan, K. Lu, J. Zhang, M. Shao and B. Hu, J. Mater. Chem. C, 2018, 6, 6164 DOI: 10.1039/C8TC01033A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements