Issue 19, 2017

Facile patterning using dry film photo-resists for flexible electronics: Ag nanowire networks and carbon nanotube networks

Abstract

In this study, we explored the use of a dry film photo-resist (DFR) in the patterning of Ag nanowire and carbon nanotube (CNT) networks for the first time. With a simple lamination process, the DFR was uniformly coated on the Ag nanowire and CNT networks on poly(ethylene terephthalate) (PET) substrates without a post-thermal baking process. Furthermore, a Na2CO3-based developer enabled the networks to be patterned without loss of conductivity. Scanning electron microscopy images revealed that the Ag nanowire and CNT networks were successfully patterned with a pattern width up to ∼30 μm. The patterned Ag nanowire networks were confirmed to follow the percolation theory, showing a logarithmically linear increase in resistance as the pattern width decreased. The results indicated that there was no harmful effect on the Ag nanowire network during the patterning process. In addition, the mechanical reliability under bending fatigue was explored, which revealed a pattern-size dependent bending fatigue behavior, where the Ag nanowire networks with smaller pattern widths showed a higher increase in resistance during bending fatigue. This simple patterning method using DFRs combined with the roll-to-roll process is expected to lead the future patterning technology of flexible electronics.

Graphical abstract: Facile patterning using dry film photo-resists for flexible electronics: Ag nanowire networks and carbon nanotube networks

Supplementary files

Article information

Article type
Paper
Submitted
28 Feb 2017
Accepted
19 Apr 2017
First published
19 Apr 2017

J. Mater. Chem. C, 2017,5, 4804-4809

Facile patterning using dry film photo-resists for flexible electronics: Ag nanowire networks and carbon nanotube networks

C. An, S. Kim, H. Lee and B. Hwang, J. Mater. Chem. C, 2017, 5, 4804 DOI: 10.1039/C7TC00885F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements