Issue 5, 2016

Dielectric investigation of high-k yttrium copper titanate thin films

Abstract

We report on the first dielectric investigation of high-k yttrium copper titanate thin films, which were demonstrated to be very promising for nanoelectronics applications. The dielectric constant of these films is found to vary from 100 down to 24 (at 100 kHz) as a function of deposition conditions, namely oxygen pressure and film thickness. The physical origin of such variation was investigated in the framework of universal dielectric response and Cole–Cole relations and by means of voltage dependence studies of the dielectric constant. Surface-related effects and charge hopping polarization processes, strictly dependent on the film microstructure, are suggested to be mainly responsible for the observed dielectric response. In particular, the bulky behaviour of thick films deposited at lower oxygen pressure evolves towards a more complex and electrically heterogeneous structure when either the thickness decreases down to 50 nm or the films are grown under high oxygen pressure.

Graphical abstract: Dielectric investigation of high-k yttrium copper titanate thin films

Supplementary files

Article information

Article type
Paper
Submitted
05 Oct 2015
Accepted
23 Dec 2015
First published
24 Dec 2015

J. Mater. Chem. C, 2016,4, 1080-1087

Author version available

Dielectric investigation of high-k yttrium copper titanate thin films

A. G. Monteduro, Z. Ameer, M. Martino, A. P. Caricato, V. Tasco, I. C. Lekshmi, R. Rinaldi, A. Hazarika, D. Choudhury, D. D. Sarma and G. Maruccio, J. Mater. Chem. C, 2016, 4, 1080 DOI: 10.1039/C5TC03189C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements