Issue 34, 2015

Bimodal silicone interpenetrating networks sequentially built as electroactive dielectric elastomers

Abstract

Two polysiloxanes, a polydimethylsiloxane-α,ω-diol (PDMS) with Mn = 370 000 g mol−1, and α,ω-bis(vinyl)polydimethylsiloxane (Vi2PDMS) with Mn = 34 500 g mol−1, and appropriate crosslinking systems for each of them (tetraethyl orthosilicate–dibutyltindilaurate and α,ω-bis(trimethylsiloxy)poly(dimethylmethyl-H-siloxane)–Speier's catalyst, respectively), were mixed together in various weight ratios (1 : 0.1, 1 : 0.2, 1 : 0.3, 1 : 0.5) and cast into films. These were sequentially crosslinked by different mechanisms. A determined pre-stretch was applied to the first network after its formation followed by thermal treatment for curing the second network. Non-prestreched networks were also prepared in parallel for comparison. The aged films were characterized from the point of view of the soluble fraction content, and analysed by differential scanning calorimetry, water vapour sorption in dynamic regime, dielectric spectroscopy and tensile tests. Dielectric strength and actuation strain were measured to estimate the suitability of the samples for electromechanical applications. The results revealed that through this approach one can relatively easily obtain very simple and homogeneous materials suitable for use as dielectric elastomer transducers.

Graphical abstract: Bimodal silicone interpenetrating networks sequentially built as electroactive dielectric elastomers

Supplementary files

Article information

Article type
Paper
Submitted
15 May 2015
Accepted
29 Jul 2015
First published
29 Jul 2015

J. Mater. Chem. C, 2015,3, 8963-8969

Author version available

Bimodal silicone interpenetrating networks sequentially built as electroactive dielectric elastomers

C. Tugui, G. Stiubianu, M. Iacob, C. Ursu, A. Bele, S. Vlad and M. Cazacu, J. Mater. Chem. C, 2015, 3, 8963 DOI: 10.1039/C5TC01391G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements