Issue 6, 2013

Large conductance switching nonvolatile memories based on p-ZnS nanoribbon/n-Si heterojunction

Abstract

A new structure nonvolatile memory, with large conductance switching (on/off ratio > 106), has been constructed from a p-ZnS nanoribbon (NR)/n-Si heterojunction. The p-type ZnS NRs were obtained using cuprous sulfide (Cu2S) as the Cu dopant. Excellent Ohmic contact to p-type ZnS NRs was achieved by using a Cu/Au bilayer electrode, which contributed to the formation of the thin Cu2S interfacial layer between the electrode and the NR, as confirmed from the combined X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) analysis. These devices exhibit a stable and reproducible hysteresis and excellent memory characteristics with a long retention time of 1 × 105 s and good endurance >6 months at room temperature. The electrical switching behavior could be attributed to the charge trapping and detrapping in interface states at the junction. The approach could potentially provide a viable way to create new advanced nonvolatile memory devices with simple structure and to fabricate large conductance switching and large-capacity data storage.

Graphical abstract: Large conductance switching nonvolatile memories based on p-ZnS nanoribbon/n-Si heterojunction

Supplementary files

Article information

Article type
Paper
Submitted
25 Sep 2012
Accepted
04 Dec 2012
First published
05 Dec 2012

J. Mater. Chem. C, 2013,1, 1238-1244

Large conductance switching nonvolatile memories based on p-ZnS nanoribbon/n-Si heterojunction

Y. Yu, Y. Jiang, P. Jiang, Y. Zhang, D. Wu, Z. Zhu, Q. Liang, S. Chen, Y. Zhang and J. Jie, J. Mater. Chem. C, 2013, 1, 1238 DOI: 10.1039/C2TC00267A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements