Issue 5, 2013

Interaction of Cy3 dye with CCG and its application for BSA detection

Abstract

Chemically converted graphene (CCG) was found to effectively quench the fluorescence emission of Cy3 dye 1 (the intensity is down to 1/38 of 1 alone) in aqueous solution, due to the formation of a CCG–1 hybrid. After the addition of a certain amount of bovine serum albumin (BSA) into the above-mentioned system, about 60 times fluorescence enhancement was observed for the hybrid CCG–1. This was employed to discriminate BSA: the fluorescence intensity was found to be proportional to the BSA added in the concentration range from 0 to 8 × 10−6 M, and the BSA detection limit was down to 5 × 10−8 M.

Graphical abstract: Interaction of Cy3 dye with CCG and its application for BSA detection

Article information

Article type
Paper
Submitted
01 Sep 2012
Accepted
13 Nov 2012
First published
14 Nov 2012

J. Mater. Chem. B, 2013,1, 693-697

Interaction of Cy3 dye with CCG and its application for BSA detection

H. Li, F. Liu, J. Han, M. Cai, S. Sun, J. Fan, F. Song and X. Peng, J. Mater. Chem. B, 2013, 1, 693 DOI: 10.1039/C2TB00055E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements