Issue 5, 2012

Wrinkles with a well-ordered checkerboard pattern, created using dip-coating of poly(methyl methacrylate) on a UV–ozone-treated poly(dimethylsiloxane) substrate

Abstract

Research on controlling wrinkles of stiff thin films on soft substrates is important for developing low-cost methods for creating micro-structures on a surface. In this paper, dip-coating with an acetonitrile solution of poly(methyl methacrylate) on a UV–ozone-treated poly(dimethylsiloxane) substrate was investigated. After the dip-coating and subsequent drying process, wrinkles were observed on the surface. Although one of the origins of the wrinkling was the swelling of the substrate surface with acetonitrile, the alignment of the wrinkles was successfully controlled by wrapping the substrate around a pipe during the dip-coating. The other origin was mechanical compressive stress in the coating, which was induced when the substrate was released from the pipe. Due to these origins, the wrinkles were aligned in two directions crossing each other at right angles, and a well-ordered checkerboard pattern was formed. The size of a unit cell of such a checkerboard pattern was typically 86 μm wide, 142 μm long, and 10 μm deep. Because the dip-coating method does not require any vacuum processes, it is potentially advantageous for wrinkling a large surface using a continuous production process.

Graphical abstract: Wrinkles with a well-ordered checkerboard pattern, created using dip-coating of poly(methyl methacrylate) on a UV–ozone-treated poly(dimethylsiloxane) substrate

Supplementary files

Article information

Article type
Paper
Submitted
03 Sep 2011
Accepted
23 Nov 2011
First published
12 Dec 2011

Soft Matter, 2012,8, 1563-1569

Wrinkles with a well-ordered checkerboard pattern, created using dip-coating of poly(methyl methacrylate) on a UV–ozone-treated poly(dimethylsiloxane) substrate

M. Watanabe, Soft Matter, 2012, 8, 1563 DOI: 10.1039/C2SM06669F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements