Issue 81, 2016, Issue in Progress

Combined study of the effect of deposition temperature and post-deposition annealing on the photoluminescence of silicon quantum dots embedded in chlorinated silicon nitride thin films

Abstract

Chlorinated-silicon nitride (SiNx:Cl) thin films with embedded silicon quantum dots (Si-QDs) were grown by remote plasma enhanced chemical vapor deposition using SiH2Cl2, H2, NH3 and Ar at different deposition temperatures (DT) in the range of 50 to 350 °C and using steps of 50 °C. After that, each sample was subjected to annealing treatments at temperatures (AT) of 400, 700 and 1000 °C. The evolution of the optical properties, composition and structure as a function of DT and AT were investigated by Null Ellipsometry, photoluminescence (PL) measurements, UV-Vis spectroscopy, X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FTIR), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM) with (EDS) and High Resolution Transmission Electron Microscopy (HRTEM). A red-shift in the PL peak and an increment in the PL integrated intensity of the films was found on increasing DT from 150 to 350 °C; such changes can be explained by modifications of the matrix chemical composition and by the quantum confinement effect due to an increase in the size and density of Si-QDs respectively. A chemical analysis revealed that films deposited below 150 °C suffer a post-deposition oxidation process leading to the formation of silicon oxide; this process is accelerated by the temperature of the annealing treatment. Meanwhile films deposited between 150 and 350 °C are mainly composed of silicon nitride that diminishes the mentioned oxidation due to the thermal treatments and promotes the splitting of Si-QDs into two populations with different average diameter. The annealed films deposited below 150 °C show a clearly decrement in the PL intensity, meanwhile the maximum emission PL peak from annealed films grown from 150 to 350 °C shifts to high emission energies. This post thermal annealing blue-shift can be mainly related to the nucleation of new small Si-QDs. We concluded that temperature is one of the most important mainstays to achieve good luminescence from Si-QDs.

Graphical abstract: Combined study of the effect of deposition temperature and post-deposition annealing on the photoluminescence of silicon quantum dots embedded in chlorinated silicon nitride thin films

Supplementary files

Article information

Article type
Paper
Submitted
17 Jun 2016
Accepted
11 Aug 2016
First published
11 Aug 2016

RSC Adv., 2016,6, 77440-77451

Combined study of the effect of deposition temperature and post-deposition annealing on the photoluminescence of silicon quantum dots embedded in chlorinated silicon nitride thin films

M. A. Serrano-Núñez, A. Rodríguez-Gómez, L. Escobar-Alarcón and J. C. Alonso-Huitrón, RSC Adv., 2016, 6, 77440 DOI: 10.1039/C6RA15723H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements