Issue 58, 2015

Synergistic toughening effects of dispersed components in PP/PA6/EPDM ternary blends; quantitative analysis of the fracture toughness via the essential work of fracture (EWF) methodology

Abstract

The present work reports and investigates the significant rigid-toughening, obtained by the incorporation of rigid polyamide 6 (PA6) phase into toughened polypropylene/ethylene–propylene–diene terpolymer (PP/EPDM) blend, to avoid substantial softening associated with the rubber-toughening. The effects of dispersed phase composition and compatibilization using PP-g-MA, on the microstructure, quasi-static fracture toughness, failure mechanisms, and tensile properties were investigated. The fracture properties were characterized in detail by the essential work of fracture (EWF) method. While addition of PA6 into neat PP reduced the fracture toughness, a remarkable monotonic increase in fracture toughness was observed upon the progressive replacement of EPDM with PA6 in PP/EPDM blends. A synergistic toughening effect of dispersed soft EPDM particles and rigid PA6 phase domains was observed, and compared to PP/EPDM binary blend the uncompatibilized ternary blends showed significantly higher fracture toughness values (we) at much lower rubber contents. The deformation micro-mechanisms and the critical role of rubber particles in achieving such a synergistic effect was highlighted and discussed by post-mortem fractography. Based on the finding that compatibilization reduced the fracture toughness of ternary blends, effective contribution of PP/PA6 interface in activation of different energy-absorbing micromechanical deformations was demonstrated. The energy partitioning approach was also employed to provide more insight into energies dissipated for yielding and subsequent tearing of the samples. The results of fracture analysis in conjunction with the tensile data showed a simultaneous toughening and stiffening effect achieved via incorporation of PA6 into PP/EPDM blends. This work could provide a new and deep understanding of rigid-toughening effect observed in multiphase systems.

Graphical abstract: Synergistic toughening effects of dispersed components in PP/PA6/EPDM ternary blends; quantitative analysis of the fracture toughness via the essential work of fracture (EWF) methodology

Article information

Article type
Paper
Submitted
21 Apr 2015
Accepted
18 May 2015
First published
21 May 2015

RSC Adv., 2015,5, 47183-47198

Author version available

Synergistic toughening effects of dispersed components in PP/PA6/EPDM ternary blends; quantitative analysis of the fracture toughness via the essential work of fracture (EWF) methodology

M. Mehrabi Mazidi and M. K. Razavi Aghjeh, RSC Adv., 2015, 5, 47183 DOI: 10.1039/C5RA07193C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements