Issue 21, 2015

Evaluation of electrospun polymer–Fe3O4 nanocomposite mats in malachite green adsorption

Abstract

Magnetoactive nanocomposite fibers, based on poly(ethylene oxide) (PEO), poly(L-lactide) (PLLA) and pre-formed oleic acid-coated magnetite nanoparticles (OA·Fe3O4), were fabricated by electrospinning and evaluated for the first time as substrates for the adsorption of N-methylated diaminotriphenylmethane dye (malachite green oxalate, MG) from aqueous media. The adsorption of MG onto the fibers was investigated under ambient conditions by means of UV-Vis spectrophotometry as a function of initial dye concentration and solution pH. Equilibrium data for MG adsorption were well-fitted with the Langmuir isotherm model indicating a monolayer adsorption process. The effect of magnetite nanoparticles on the adsorption efficacy has been also demonstrated by performing the aforementioned studies on fibers that did not contain OA·Fe3O4. The obtained results suggested that the presence of embedded magnetite nanoparticles reduces the fiber adsorption efficiency to some extent. Moreover, the thermodynamic parameters determined from adsorption experiments carried out at three different temperatures indicated that the adsorption of MG onto the Fe3O4-free and the Fe3O4-containing fibers is spontaneous and endothermic. Although the presence of Fe3O4 within the fibers disfavored somewhat the adsorption process, nevertheless, the incorporation of the magnetic nanoparticles within these materials assisted their recovery from aqueous solutions by means of an externally applied magnetic field. Desorption of MG from the fibers could be realized upon fiber immersion in alcohol solution, thus allowing the regeneration and re-use of the adsorbents that retained the same adsorption efficiency after multiple regeneration cycles. MG adsorption studies performed in urban wastewater samples by using the PEO/PLLA and the PEO/PLLA/OA·Fe3O4 fibers as adsorbents, demonstrated the potential use of these materials in real wastewater treatment applications.

Graphical abstract: Evaluation of electrospun polymer–Fe3O4 nanocomposite mats in malachite green adsorption

Article information

Article type
Paper
Submitted
23 Dec 2014
Accepted
23 Jan 2015
First published
23 Jan 2015

RSC Adv., 2015,5, 16484-16496

Evaluation of electrospun polymer–Fe3O4 nanocomposite mats in malachite green adsorption

I. Savva, O. Marinica, C. A. Papatryfonos, L. Vekas and T. Krasia-Christoforou, RSC Adv., 2015, 5, 16484 DOI: 10.1039/C4RA16938G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements