Issue 11, 2015

Effect of SiO2 nanoparticles on the reaction-induced phase separation in dynamically asymmetric epoxy/PEI blends

Abstract

Hydrophilic silica nanoparticles were introduced into the epoxy/polyetherimide (epoxy/PEI) binary system to study their effect on the reaction induced phase separation (RIPS) by differential scanning calorimetry (DSC), optical microscopy (OM), and time-resolved light scattering (TRLS). Depending on the specific interaction between the silica surface and the epoxy, the silica nanoparticles selectively distribute in the epoxy-rich domain, leading to a slow down of the diffusion of the epoxy molecules. And the coarsening mechanism was forced towards the diffusion-controlled regime, which enhanced the viscoelastic effect and produced a more dynamic asymmetric epoxy/PEI system. Based on this, the final morphology was stopped at an earlier stage of an inverted phase structure (isolated epoxy-rich droplet and PEI-rich matrix). The silica nanoparticles showed a critical impact on the balance of the diffusion and geometrical growth of epoxy molecules. Further, the activity energy of the curing reaction and the phase separation temperatures were decreased by existence of the silica nanoparticles.

Graphical abstract: Effect of SiO2 nanoparticles on the reaction-induced phase separation in dynamically asymmetric epoxy/PEI blends

Article information

Article type
Paper
Submitted
13 Oct 2014
Accepted
24 Dec 2014
First published
24 Dec 2014

RSC Adv., 2015,5, 8471-8478

Effect of SiO2 nanoparticles on the reaction-induced phase separation in dynamically asymmetric epoxy/PEI blends

W. Li, Z. Xia, A. Li, Y. Ling, B. Wang and W. Gan, RSC Adv., 2015, 5, 8471 DOI: 10.1039/C4RA12261E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements