Issue 50, 2014

Synthesis of gold nanoparticles within silica monoliths through irradiation techniques using Au(i) and Au(iii) precursors

Abstract

The formation of gold nanoparticles (GNPs) within mesoporous silica matrices by means of irradiation techniques is reported. The xerogels were impregnated with solutions of two different gold precursors: (Ph3P)AuCl for Au(I) and [nBu4N]AuCl4 for Au(III). The irradiations were performed with two continuous wave laser sources (266 and 532 nm), with a femtosecond pulsed laser (800 nm), and with a mercury vapour lamp emitting in the UV region. It has been shown that no reducing agent was ever required to obtain GNP formation. XRD data exhibited the typical patterns of fcc gold, except for two cases involving the Au(I)-doped matrices, where a preferential crystallographic orientation was observed. Excluding the case of the UV irradiations performed on Au(III)-doped samples, we always obtained the formation of roughly spherical and well dispersed GNPs of relatively small size (6–60 nm). The gold-reduction mechanisms proposed depend on the chosen irradiation technique. Moreover, when laser sources are employed, GNP formation can be selectively limited to the irradiated areas, thus making it possible to obtain reproducible patterns of GNPs.

Graphical abstract: Synthesis of gold nanoparticles within silica monoliths through irradiation techniques using Au(i) and Au(iii) precursors

Supplementary files

Article information

Article type
Paper
Submitted
14 Feb 2014
Accepted
28 May 2014
First published
04 Jun 2014

RSC Adv., 2014,4, 26038-26045

Author version available

Synthesis of gold nanoparticles within silica monoliths through irradiation techniques using Au(I) and Au(III) precursors

M. Tonelli, S. Turrell, O. Cristini-Robbe, H. El Hamzaoui, B. Capoen, M. Bouazaoui, M. Gazzano and M. C. Cassani, RSC Adv., 2014, 4, 26038 DOI: 10.1039/C4RA01315H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements