Issue 18, 2018

Co oxide nanostructures for electrocatalytic water-oxidation: effects of dimensionality and related properties

Abstract

A facile hydrothermal synthesis route was explored to obtain various nanostructures of Co oxide for applications in electrocatalytic water-splitting. The effect of reaction time and metal precursor ions on the morphology of synthesized nanostructures was studied in detail with the aid of a scanning electron microscope. By systematic optimization of the synthesis parameters, Co oxide nanostructures with single dimensionality were obtained in the form of 0D nanoparticles (NPs), 1D nanowires (NWs), 2D nanosheets (NSs) and 3D nanocrystals (NCs). The effectiveness of the developed nanostructures towards oxygen evolution reaction (OER) was studied and a promising OER activity was recorded for all the samples. Amongst all the developed catalysts, Co(OH)2 NPs showed the lowest overpotential of 339 mV to achieve a current density of 10 mA cm−2, which is even lower than that of noble-metal oxides such as the commercial RuO2 catalyst (370 mV). The specific effect of different parameters such as BET surface area, phase, crystallographic orientation of surface lattice planes, electroactive surface area and surface active species on the OER performance was studied. It was found that the Co3O4 phase is more active for the OER, compared to the Co(OH)2 phase. However, Co(OH)2 NPs showed the best OER performance owing to their higher BET surface area, thereby underlining the significance of the catalyst surface area. The effect of the number of active surface atoms was demonstrated by estimating the electroactive surface area of all Co3O4 nanostructures. It was also shown that the formation of CoO2 species (Co(IV)) on the surface is more beneficial for the OER as compared to the formation of CoOOH species (Co(III)). Finally, the robustness of the developed Co3O4 nanostructures was established by performing a recycling test for the OER (1000 cycles) and the observed change in the catalytic activity was correlated with morphological variation.

Graphical abstract: Co oxide nanostructures for electrocatalytic water-oxidation: effects of dimensionality and related properties

Supplementary files

Article information

Article type
Paper
Submitted
13 Jan 2018
Accepted
05 Apr 2018
First published
06 Apr 2018

Nanoscale, 2018,10, 8806-8819

Co oxide nanostructures for electrocatalytic water-oxidation: effects of dimensionality and related properties

S. Gupta, A. Yadav, S. Bhartiya, M. K. Singh, A. Miotello, A. Sarkar and N. Patel, Nanoscale, 2018, 10, 8806 DOI: 10.1039/C8NR00348C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements