Issue 47, 2016

Fast nucleation for silica nanoparticle synthesis using a sol–gel method

Abstract

We have developed a method that for the first time allowed us to synthesize silica particles in 20 minutes using a sol–gel preparation. Therefore, it is critically important to understand the synthesis mechanism and kinetic behavior in order to achieve a higher degree of fine tuning ability during the synthesis. In this study, we have employed our ability to modulate the physical nature of the reaction medium from sol–gel to emulsion, which has allowed us to halt the reaction at a particular time; this has allowed us to precisely understand the mechanism and chemistry of the silica polymerization. The synthesis medium is kept quite simple with tetraethyl orthosilicate (TEOS) as a precursor in an equi-volumetric ethanol–water system and with sodium hydroxide as a catalyst. Synthesis is performed under ambient conditions at 20 °C for 20 minutes followed by phasing out of any unreacted TEOS and polysilicic acid chains via their emulsification with supersaturated water. We have also demonstrated that the developed particles with various sizes can be used as seeds for further particle growth and other applications. Luminol, a chemiluminescent molecule, has been entrapped successfully between the layers of silica and was demonstrated for the chemiluminescence of these particles.

Graphical abstract: Fast nucleation for silica nanoparticle synthesis using a sol–gel method

Supplementary files

Article information

Article type
Paper
Submitted
25 Sep 2016
Accepted
08 Nov 2016
First published
10 Nov 2016

Nanoscale, 2016,8, 19662-19667

Fast nucleation for silica nanoparticle synthesis using a sol–gel method

C. K. Dixit, S. Bhakta, A. Kumar, S. L. Suib and J. F. Rusling, Nanoscale, 2016, 8, 19662 DOI: 10.1039/C6NR07568A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements