Issue 5, 2016

Fabrication of poly-crystalline Si-based Mie resonators via amorphous Si on SiO2 dewetting

Abstract

We report the fabrication of Si-based dielectric Mie resonators via a low cost process based on solid-state dewetting of ultra-thin amorphous Si on SiO2. We investigate the dewetting dynamics of a few nanometer sized layers annealed at high temperature to form submicrometric Si-particles. Morphological and structural characterization reveal the polycrystalline nature of the semiconductor matrix as well as rather irregular morphologies of the dewetted islands. Optical dark field imaging and spectroscopy measurements of the single islands reveal pronounced resonant scattering at visible frequencies. The linewidth of the low-order modes can be ∼20 nm in full width at half maximum, leading to a quality factor Q exceeding 25. These values reach the state-of-the-art ones obtained for monocrystalline Mie resonators. The simplicity of the dewetting process and its cost-effectiveness opens the route to exploiting it over large scales for applications in silicon-based photonics.

Graphical abstract: Fabrication of poly-crystalline Si-based Mie resonators via amorphous Si on SiO2 dewetting

Associated articles

Article information

Article type
Paper
Submitted
30 Oct 2015
Accepted
30 Dec 2015
First published
31 Dec 2015

Nanoscale, 2016,8, 2844-2849

Author version available

Fabrication of poly-crystalline Si-based Mie resonators via amorphous Si on SiO2 dewetting

M. Naffouti, T. David, A. Benkouider, L. Favre, A. Ronda, I. Berbezier, S. Bidault, N. Bonod and M. Abbarchi, Nanoscale, 2016, 8, 2844 DOI: 10.1039/C5NR07597A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements