Issue 24, 2013

Self-assembled growth of multi-layer graphene on planar and nano-structured substrates and its field emission properties

Abstract

Vertical multi-layer graphenes (MLGs) have been synthesized without a catalyst on planar and nano-structured substrates by using microwave plasma enhanced chemical vapor deposition. The growth of MLGs on non-carbon substrates is quite different from that on carbon-based substrates. It starts with a pre-deposition of a carbon buffer layer to achieve a homo-epitaxial growth. The nucleation and growth of MLGs was found to be strongly influenced by the surface geometry and topography of substrates. Planar substrates suitable for atom diffusion are favorable for growing large-scale MLGs, and defect-rich substrates are beneficial for quick MLG nucleation and thus the growth of densely distributed MLGs. The field emission properties of MLGs grown on planar and nano-structured substrates were studied and are found to be strongly dependent on the nature of substrates. Substrates having good conductivity and large aspect ratios such as carbon nanotubes (CNTs) have good field emission properties. The best field emission properties of MLG/CNT composites with optimal shapes were observed with a low turn-on electric field of 0.93 V μm−1, a threshold field of 1.56 V μm−1, a maximum emission current density of 60.72 mA cm−2, and excellent stability.

Graphical abstract: Self-assembled growth of multi-layer graphene on planar and nano-structured substrates and its field emission properties

Supplementary files

Article information

Article type
Paper
Submitted
07 Aug 2013
Accepted
09 Oct 2013
First published
10 Oct 2013

Nanoscale, 2013,5, 12388-12393

Self-assembled growth of multi-layer graphene on planar and nano-structured substrates and its field emission properties

J. Deng, B. Yu, G. Li, X. Hou, M. Zhao, D. Li, R. Zheng and G. Cheng, Nanoscale, 2013, 5, 12388 DOI: 10.1039/C3NR04145J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements