Issue 5, 2011

Synthesis of ultrabright nanoporous fluorescent silica discoids using an inorganic silica precursor

Abstract

The templated sol–gel synthesis of ultrabright fluorescent nanoporous silica particles based on the use of organic silica sources has previously been reported. The use of organosilanes as the main silica precursors has a number of issues, in particular, the low robustness of the synthesis due to instability of the organic silica source. Here we report on a novel synthesis of ultrabright fluorescent nanoporous silica discoids (a specific shape in-between the sphere and disk) of 3.1 ± 0.7 microns in size, which were prepared using a stable inorganic sodium silicate silica source. Organic fluorescent dye Rhodamine 6G (R6G) was physically (non-covalently) entrapped inside cylindrical nanochannels of ∼4–5 nm in diameter. In contrast to the synthesis with organic silica precursors, the obtained particles showed an excessive leakage of dye. To prevent this leakage, we modified the synthesis by adding a small amount of a secondary silica source. The synthesized particles show virtually no leakage, high photostability, and a brightness equivalent to the fluorescence of up to 7 × 107 free R6G molecules. This is about 7 times higher than the fluorescent brightness of particles of the same size made of CdSe/ZnS quantum dots, and 420 times higher than the brightness of the same volume of aqueous solution of free R6G dye.

Graphical abstract: Synthesis of ultrabright nanoporous fluorescent silica discoids using an inorganic silica precursor

Article information

Article type
Paper
Submitted
22 Dec 2010
Accepted
22 Feb 2011
First published
08 Apr 2011

Nanoscale, 2011,3, 2036-2043

Synthesis of ultrabright nanoporous fluorescent silica discoids using an inorganic silica precursor

D. O. Volkov, E. Cho and I. Sokolov, Nanoscale, 2011, 3, 2036 DOI: 10.1039/C0NR01015D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements