Issue 5, 2012

Dual-electrode microfluidic cell for characterizing electrocatalysts

Abstract

In this paper we introduce a microelectrochemical cell configured for generation-collection experiments and designed primarily for examining the kinetics of electrocatalysts. The heart of the device consists of two, closely spaced, pyrolyzed photoresist microband electrodes enclosed within a microchannel. The cell is suitable for evaluating the efficiency of electrocatalysts under an unprecedented range of conditions. Specifically, compared to the gold-standard rotating ring-disk electrode (RRDE), this device offers four major advantages. First, collection efficiencies of 97% are easily achieved, compared to values of 20–37% that are characteristic of RRDEs. Second, mass transfer coefficients of 0.5 cm s−1 are accessible for typical redox species, which is significantly higher than RRDEs (up to 0.01 cm s−1). Third, we show that the device can operate effectively at temperatures up to 70 °C, which is important for measuring electrochemical kinetics that are relevant to fuel cell catalysts. Finally, much less catalyst and much smaller volumes of electrolyte solution are required to make kinetic measurements using the microelectrochemical device compared to the RRDE. Here, we present the simple procedure used to fabricate the device, fundamental electroanalytical characterization, and electrocatalytic measurements relevant to the oxygen reduction reaction.

Graphical abstract: Dual-electrode microfluidic cell for characterizing electrocatalysts

Supplementary files

Article information

Article type
Paper
Submitted
30 Nov 2011
Accepted
05 Jan 2012
First published
26 Jan 2012

Lab Chip, 2012,12, 986-993

Dual-electrode microfluidic cell for characterizing electrocatalysts

I. Dumitrescu, D. F. Yancey and R. M. Crooks, Lab Chip, 2012, 12, 986 DOI: 10.1039/C2LC21181E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements