Issue 16, 2009

A microfluidic apparatus for the study of ice nucleation in supercooled water drops

Abstract

This paper describes a microfluidic instrument that produces drops of supercooled water suspended in a moving stream of liquid fluorocarbon, and measures the temperatures at which ice nucleates in the drops. A microfluidic chip containing a monodisperse drop generator and a straight channel with 38 embedded resistance thermometers was placed in contact with a seven-zone temperature-control plate and imaged under a microscope with a high-speed camera. This instrument can record the freezing temperatures of tens of thousands of drops within minutes, with an accuracy of 0.4 °C. The ice-nucleation temperatures in ∼80-µm drops were reported for the freezing of 37 061 drops of pure water, and of 8898 drops of water seeded with silver iodide. Nucleation of ice in pure water was homogenous and occurred at temperatures between −36 and −37.8 °C, while water containing silver iodide froze between −10 and −19 °C. The instrument recorded the largest sets of individual freezing temperatures (37 061), had the fastest data acquisition rate (75 measurements/s), and the best optical (3 µm) and temporal (70 µs) resolutions among instruments designed to study nucleation of ice. The dendritic growth of ice in 150-µm drops of supercooled water at −35 °C was observed and imaged at a rate of 16 000 frames/s.

Graphical abstract: A microfluidic apparatus for the study of ice nucleation in supercooled water drops

Supplementary files

Article information

Article type
Paper
Submitted
30 Mar 2009
Accepted
01 May 2009
First published
22 May 2009

Lab Chip, 2009,9, 2293-2305

A microfluidic apparatus for the study of ice nucleation in supercooled water drops

C. A. Stan, G. F. Schneider, S. S. Shevkoplyas, M. Hashimoto, M. Ibanescu, B. J. Wiley and G. M. Whitesides, Lab Chip, 2009, 9, 2293 DOI: 10.1039/B906198C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements