Issue 10, 2008

Laser-induced cavitation based micropump

Abstract

Lab-on-a-chip devices are in strong demand as versatile and robust pumping techniques. Here, we present a cavitation based technique, which is able to pump a volume of 4000 μm3 within 75 μs against an estimated pressure head of 3 bar. The single cavitation event is created by focusing a laser pulse in a conventional PDMS microfluidic chip close to the channel opening. High-speed photography at 1 million frames s−1 resolves the flow in the supply channel, pump channel, and close to the cavity. The elasticity of the material affects the overall fluid flow. Continuous pumping at repetition rates of up to 5 Hz through 6 mm long square channels of 20 μm width is shown. A parameter study reveals the key-parameters for operation: the distance between the laser focus and the channel, the maximum bubble size, and the chamber geometry.

Graphical abstract: Laser-induced cavitation based micropump

Supplementary files

Article information

Article type
Paper
Submitted
23 Apr 2008
Accepted
26 Jun 2008
First published
28 Aug 2008

Lab Chip, 2008,8, 1676-1681

Laser-induced cavitation based micropump

R. Dijkink and C. Ohl, Lab Chip, 2008, 8, 1676 DOI: 10.1039/B806912C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements