Issue 46, 2012

Electrospun nest-shaped TiO2 structures as a scattering layer for dye sensitized solar cells

Abstract

Nest-shaped TiO2 (NS-TiO2) structures were fabricated by an electrospinning technique and used as an effective scattering layer on the top of TiO2 nano-particle electrodes in dye sensitized solar cells (DSSCs). The NS-TiO2 scattering layer enhanced the photocurrent of DSSCs due to the enhanced light harvesting via the improved light scattering and lower electron transfer resistance. Under one sun illumination (AM 1.5G, 100 mW cm−2), a high efficiency of 8.02% was achieved for the cell with a NS-TiO2 scattering layer, which was an increase of 7.1% compared to the cell without a scattering layer (7.49%).

Graphical abstract: Electrospun nest-shaped TiO2 structures as a scattering layer for dye sensitized solar cells

Article information

Article type
Communication
Submitted
21 May 2012
Accepted
05 Jul 2012
First published
09 Jul 2012

J. Mater. Chem., 2012,22, 24326-24329

Electrospun nest-shaped TiO2 structures as a scattering layer for dye sensitized solar cells

G. Zhu, L. Pan, J. Yang, X. Liu, H. Sun and Z. Sun, J. Mater. Chem., 2012, 22, 24326 DOI: 10.1039/C2JM33219A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements