Issue 29, 2012

Mediator free highly sensitive polyaniline–gold hybrid nanocomposite based immunosensor for prostate-specific antigen (PSA) detection

Abstract

Polyaniline nanowires (PANI) and gold nanoparticle (AuNPs) based hybrid nanocomposite film fabricated onto a Au substrate has been used to fabricate a mediator free immunosensor for the detection of PSA. Microscopic studies reveal uniform distribution of the AuNPs on the PANI backbone resulting in a nanoporous morphology that provides the desired microenvironment for antibody immobilization. The results of electrochemical studies suggest that AuNPs increase the electro-active surface area of PANI and result in high electron transport in a mediator free electrolyte. The AuNP–PANI hybrid nanocomposite also provides a very effective surface for the immobilization of anti-PSA revealing an increase in electron transport that results in improved sensing performance. The electrochemical response of the anti-PSA/AuNP–PANI/Au immunoelectrode as a function of PSA concentration exhibits a linear range of 1 pg mL−1 to 100 ng mL−1, a detection limit of 0.6 pg mL−1 (lower than ELISA), a sensitivity of 1.4 μA M−1 (higher than ELISA) along with a regression coefficient of 98.99%.

Graphical abstract: Mediator free highly sensitive polyaniline–gold hybrid nanocomposite based immunosensor for prostate-specific antigen (PSA) detection

Article information

Article type
Paper
Submitted
17 Jan 2012
Accepted
24 May 2012
First published
25 Jun 2012

J. Mater. Chem., 2012,22, 14763-14772

Mediator free highly sensitive polyaniline–gold hybrid nanocomposite based immunosensor for prostate-specific antigen (PSA) detection

A. Dey, A. Kaushik, S. K. Arya and S. Bhansali, J. Mater. Chem., 2012, 22, 14763 DOI: 10.1039/C2JM31663C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements